Volume 881

Main
IOP Conference Series Materials Science and Engineering
Volume 881

IOP Conference Series Materials Science and Engineering

Volume 881

1

Implementation of Phase Shifted Carrier Modulation Technique for Cascaded Five-Level Inverter Using FPGA

Ibraheem, Ahmed M. T., Mohammed, Laith A., Ali, Qusay H.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.05 MB

2020

2

Compressive strength and shrinkage of concrete containing calcium oxide (CaO) powder

Mahdi, Zainab H., Abbas, Waleed A., Abdulhussein, Faisal K., Abdulghani, Mays R., Hasan, Mustafa Q.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.85 MB

2020

3

Implementation of the GPS microstrip circular patch antenna

Fadhil, S. H., Thaher, R. H.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 668 KB

2020

4

Experimental Investigation of Hold Time Effect on Springback in V-Bending Sheet Metal Forming Process

Khleif, Ali Abbar, Kashkool, Lujain H, Hassoon, O H

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 773 KB

2020

5

Design and Implementation of Intelligent MPPT Based on FPGA for PV System

Mahmood, Mohanad H., Ali, Inaam I., Ahmed, Oday A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 2.21 MB

2020

6

Estimation and Analysis of Costs for Electrical Power Transmission Lines in Iraqi Projects

Hatem, Wadhah A., Erzaij, Kadhim R.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 709 KB

2020

7

Joining of Aluminium Alloy AA6061-T6 to PVC Polymer by Friction Stir Lap joining Process

Mohammed, K A, Hussein, S K, Khuder, A H

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.38 MB

2020

8

The crack displacement prediction of a composite sample by modelling the mixed mode bending test

Ibrahim, Isam Jabbar, Moosa, Affaan Uthman, Battawi, Ali Adel

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 579 KB

2020

9

Determination the effect of gamma radiation on CR-39 detector by analysis of photoelasticity images using MATLAB software

Hasan, Sinan Mohamed, Al-Jobouri, Hussain Ali, Jalal, O. A., Hasan, Jamal Abduljabar, Najam, Laith A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 967 KB

2020

10

Effect of Heat Treatment on Toughness and Fatigue Behavior Strength of Steel CK45

Ibrahim Al-Zuhairi, Haitham M, Hamza, Asaad Khudhair, Mahdi, Bahaa Sami, Al-Alkawi, Hussain J M

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 807 KB

2020

11

Control of vibration by using dynamic vibration absorber

Ahmed, R S, Atiyah, K A., Abdulsahib, I A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 687 KB

2020

12

Monitoring and evaluation of the water pollution

Abdulrazzak, Ibtihaj A., Bierk, Hussain, Abdulrazzaq, Ali Abdulwahhab

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 602 KB

2020

13

Locating Site Selection for Rainwater Harvesting Structure using Remote Sensing and GIS

Khudhair, M A, Sayl, K N, Darama, Y

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 869 KB

2020

14

The Role of ZnO Nano-fluids on Heat Treatments of Medium Carbon Steel

Hassoni, Safaa M., Azpen, Qasim M., Assi, Abdullah Dhayea, Ismael, Mustafa K.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.16 MB

2020

15

Synthesis of iron oxide (Î²-fe 2 o 3 ) nanoparticles from Iraqi grapes extract and its biomedical application

Aziz, Wisam J., Abid, Muslim A., Kadhim, Duha A., Mejbel, Mohanad Kadhim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 836 KB

2020

16

The effects of frequency and amplitude of vibration on the mixing and segregation processes in granular materials

Mahdi, Bahaulddin D, Faleh, Nadhim M

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 710 KB

2020

17

Analytical Model of a Holmium-doped Fiber Laser Including Up-conversion Transition

Khamis, M A, Al-Abbasi, Ziad Qais

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 561 KB

2020

18

The Influence of Process Parameters on Anthocyanin Content in Ipomoea Batatas Extract

Boi Huyen, Nguyen Thuc, Thang, Nguyen Hoc

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 788 KB

2020

19

Effect of the Location of Draw Bead and Its Profile in Cylindrical Cup Forming

Hussein, Narmeen Zuhair, Ameen, Hani Aziz, Saleh, Ali Hassan

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 832 KB

2020

20

Design and Implementation of a Modified Luo Converter with HigherâVoltage Ratio Gain

Mohammed, Ahmed T., Alshamaa, Nabil K.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 697 KB

2020

21

Effects of Opening on Load Carrying Capacity of Reinforced Concrete Slabs: Analytical Study

Hadi, Waleed Khalid, Muttashar, Majid

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 878 KB

2020

22

Based on IoT Healthcare Application for Medical Data Authentication: Towards A New Secure Framework Using Steganography

Hashim, Mohammed Mahdi, Rhaif, Suhad Hasan, Abdulrazzaq, Ali A., Ali, Adnan Hussein, Taha, Mustafa Sabah

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 784 KB

2020

23

Reduced pole to pole voltage deviations through stopping MMC blockading loss of terminals below DC faults

Ahmed, Raghad Hameed, Abdulrazzaq, Ali Abdulwahhab

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 723 KB

2020

24

Triple Solutions of Nanoparticle plus Polymer-Surfactant compound for Enhancing the Drag Reduction Using a Rotational Disk Apparatus

Alsaedi, Sajda S, Shnain, Zainab Y., Rashed, Musaab K., Filip, P

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 588 KB

2020

25

Instant messaging security and privacy secure instant messenger design

Ali, R M, Alsaad, S N

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 568 KB

2020

26

Influence of Compaction Method on Rutting Resistance of Hot Mix Asphalt

Alkawaaz, Namir Ahmed, Asmael, Noor Moutaz

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 669 KB

2020

27

The Role of Brick in Determining Features of Iraqi Architecture

Al-Assadi, Fawzia Irhayyim, Al-Dewachi, Mumtaz Hazim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 922 KB

2020

28

Virtual private network impacts on the computer network performance with different traffic generators

Nagy, Zaman, Wali, Mousa K.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 397 KB

2020

29

A New Proposed Pendulum-Like with Attraction-Repulsion mechanism Algorithm for Solving Optimization Problems

Abed, I A, Koh, S P, Sahari, K S M, Tiong, S K, Ali, M M, Abdul Kadhim, A A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1010 KB

2020

30

A Smart Embedded System for Humid Air Condensation and Water Harvesting

Mohammad, M A, Abid, A J, Farhood, A D

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 536 KB

2020

31

Fatigue behavior and fractography in friction stir welding zones of dissimilar aluminum alloys (AA5086-H32 with AA6061-T6)

Mousa, Ahmed B, Abbass, Muna K, Hussein, S K

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 786 KB

2020

32

Influence of Al 2 O 3 Nanoparticles Addition to AA6082-T6 on Mechanical Properties by Stir Casting Technique

Assi, Abdullah Dhayea

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 647 KB

2020

33

Sustainability of Sovereign Buildings in Mesopotamian Civilization

Al Yaseen, Elaf Hasan, Ashour, Ammar S, Al-Alwan, Hoda A. S.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.72 MB

2020

34

Effect of Sliding Speed on the Thermal Fields and Frictional Behaviours of Asbestos-free Frictional Materials Used for Dry Clutch System

Al-Zubaidi, Salah, Senatore, Adolfo, Abdullah, Oday I., Scuotto, Nicola

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 555 KB

2020

35

Mixed Convection Enhancement in a Rectangular Cavity by Triangular Obstacle

Afluq, Shaalan Ghanam, Abas Siba, Mohamed Abed Al, Jehhef, Kadhum Audaa

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.42 MB

2020

36

Using The Glass and Rubber waste as Sustainable Materials to Prepare Foamed Concrete with Improved Properties

Hameed, Awham M., Hamada, Ruqaya F.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 900 KB

2020

37

Joining of Double Pre-Holed Aluminum Alloy AA6061-T6 to Polyamide PA using Hot Press Technique

Barrak, Osamah Sabah, Saad, Mursal Luaibi, Mezher, Marwan T., Hussein, Sabah Khammass, Hamzah, Mahmood Mohammed

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 614 KB

2020

38

Experimental Study on Electrodes Types in Electrical Discharge Machining (EDM) of High-Speedd Steel

Aghdeab, Shukry H., Khudhier, Waqass S., Elias, Rasha R.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 362 KB

2020

39

An integral sliding mode control for the magnetic levitation system based on backstepping approach

Al-Samarraie, Shibly Ahmed, Gorial, Ivan Isho, Mshari, Mustafa Hussein

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 654 KB

2020

40

Sustainable Environment in Interior Design: Design by Choosing Sustainable Materials

Alfuraty, Ali Basim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.51 MB

2020

41

Reference measurement channel RMC parameters of LTE downlink waveforms

Al Azzawi, Fatima Faydh, Al Azzawi, Zainab Faydhe, Al Azzawi, Sada Faydhe, Abid, Faeza Abbas

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 779 KB

2020

42

Modulation and RS-CC rate specifications in WiMAX IEEE 802.16 Standard with MATLAB Simulink model

Al-Azzawi, Fatima Faydhe, Al-Azzawi, Zainab Faydhe, Shandal, Shereen, Abid, Faeza Abas

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 595 KB

2020

43

Performance of the adaptive sliding mode control scheme for output voltage control of the DC/DC buck converter system

Rasheed, Luay Thamir

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.96 MB

2020

44

Municipal Waste Water Treatment Using Sequencing Batch Reactor (SBR)

Mohammed, H.M, Kheria, M.E

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 345 KB

2020

45

Strength of resistance spot welding of aluminum alloy AA6061 to carbon steel using different filler materials

Al-Filfily, A A, Al-Adili, A S, Sar, M H

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 648 KB

2020

46

Modeling and Simulation of A Low Cost Perturb& Observe and Incremental Conductance MPPT Techniques In Proteus Software Based on Flyback Converter

Saleh, Ameer L., Obed, Adel A., Hassoun, Zainab Abdullah, Yaqoob, Salam J.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 860 KB

2020

47

Developing a pavement maintenance management system of multi-lane highway in Iraq

Hasan, M A, Jrew, B K, Abed, F H, Msallam, M S

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.05 MB

2020

48

Improving the Specifications of Floor Coating by adding nanoclay

Hussein, Seenaa I

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 688 KB

2020

49

Groundwater Quality Assessment Using Water Quality Index Technique: A Case Study of Kirkuk Governorate, Iraq.

Al-Tameemi, I. M., Hasan, M. B., Al-Mussawy, H. A., Al-Madhhachi, A. T.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 2.10 MB

2020

50

Using of Genetic algorithm to obtain proper Coordination of Directional overcurrent relays.

Abd Almuhsen, Tahseen Ali, Sultan, Ahmed Jasim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 752 KB

2020

51

Design of Mobile Healthcare Monitoring System Using IoT Technology and Cloud Computing

Al-Sheikh, Mustafa A, Ameen, Ibrahim A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 753 KB

2020

52

Modeling and Anlysis for Diagnosis Skin Lesions using Modern Artificial Swarm Intelligence Techniques (MASITs)

Aljanabi, Mohanad, Ajel, Ahmed R., Al-Azawi, Aws, Abdul-Nab, Rawaa A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 734 KB

2020

53

Compact 3x1 Elements Reconfigurable MIMO Antenna for Cognitive Radio Applications

Jabber, Abdullah A, Jassim, Ali Khalid, Thaher, Raad H

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 797 KB

2020

54

Novel Wall-Climbing Robot Capable of Transitioning and Perching

Mahmood, S K, Bakhy, S H, Tawfik, M A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 991 KB

2020

55

Numerical and experimental study for assessment the effect of baffles in a grooved cavity

Yasin, Aya H., Yasin, Nabil J.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.37 MB

2020

56

Design and Implementation of Asymmetric Extrusion Die Using Bezier Technique

Bedan, Aqeel Sabree, Mansor, Khalida kadhim, Anwer, Kany Kamaran, Kadhim, Hanan Hikmat

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 752 KB

2020

57

Design of Sliding Mode Control for Overhead Crane Systems

Hussein, Emad. Q., Al-Dujaili, Ayad Q., Ajel, Ahmed R.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 680 KB

2020

58

Semi-alive architecture âfrom healing to self-healing in architectureâ

Kadhom, Ghassan Ibrahim, Jaafar, Ali Mohsen

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 933 KB

2020

59

Removal of Precious Metals from Electronic-Waste by Using Composite Material

Hilal, Raghad Hamid

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 877 KB

2020

60

Extraction of high purity amorphous silica from rice husk by chemical process

Ajeel, Sami abualnoun, Sukkar, Khalid A., Zedin, Naser Korde

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.07 MB

2020

61

Automation of the spatial indicators and the sustainability of regional planning

Ebraheem, Ammar Khalil

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 667 KB

2020

62

Experimental Comparative Study of Effect of Different Additive Materials on Concrete Mix Alkalinity and Heat Generation

Fayadh, Omer Khalid, Qasim, Ola Adel, Farhan, Omar Shamal

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 756 KB

2020

63

Forming of Aluminum Foam Sandwich Panels

Hassan, Weaam Adil, Ameen, Hani Aziz, Alsabti, Haidar Akram

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.74 MB

2020

64

Modeling and simulation of 1kw single phase grid tied inverter for solar photovoltaic system

Hasan, Murtadha Jasim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.07 MB

2020

65

Removal of Heavy Metals from Wastewater Using Pomegranate Peel

Rashed, Musaab K., Tayh, Wissam

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 378 KB

2020

66

Fuzzy Logic Power Flow Control in divide Full Bridge Three-Port Converter

Al-Chlaihawi, Sarab, Alrubei, Mohammed A. T., Al-Gizi, Ammar, Al-Saadi, Mohammed, Louzazni, Mohamed

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 985 KB

2020

67

Prediction the Strength of Fibered Reinforced Concrete Pavement Using Response Surface Methodology: Parametric Study

Abdulridha, Mundher A., Salman, Mohamed M., Banyhussan, Qais Sahib

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1002 KB

2020

68

POX Controller and Open Flow Performance Evaluation in Software Defined Networks (SDN) Using Mininet Emulator

Noman, Haeeder Munther, Jasim, Mahdi Nsaif

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 691 KB

2020

69

Real measurement of optimal access point localizations

Zaal, R M, Mustafa, F M, Abbas, E I, Mosleh, M F, Abdulwahid, M M

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 776 KB

2020

70

Change in land-uses of Ramadi city and its influence on public transportation sustainability

Ahmed, N. A., Mahmood, T. S.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.23 MB

2020

71

Stress-strain behaviour and flexural strength of silica fume polymer-modified concrete

Mezher, Thaer Matlab, Breesem, Khalid Mohammed, Hassen, Douread Raheem, Jaafar, Azhar Ayad

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 658 KB

2020

72

Design and optimization of backstepping controller applied to autonomous quadrotor

Kadhim, Mina Qays, Hassan, Mohammed Y

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 725 KB

2020

73

The Role Of Addition In Leftover Places In The Sustainability Of Historical Buildings

Hussain, Sarah Silan, Hussain, Asmaa Muhamad

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 2.15 MB

2020

74

Investigation of Friction Stir Welding of AA2024-T4 Thin Sheets for Industrial Applications

Ridha, Munaf Hashim, Alkhazraji, Sohaib Khlil, Abdullah, Isam Tareq

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 968 KB

2020

75

Numerical Study of Specially Shaped Slender RC Columns under Compressive Load

Abdualrahman, Safaa Qays, Al-Zuhairi, Alaa Hussein

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 856 KB

2020

76

The Role of Sustainable Development Approaches in Addressing Urban Tensions in Cities

Al-Khafagy, Z. F., Al-Hinkawi, W. Sh.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.04 MB

2020

77

Resilience Strategies in Neighborhoods

Tahir, Ban Jalil, Abbas, Sanaâ Satiâ

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 348 KB

2020

78

Investigate the Sustainable Efficient Spaces in Islamic Inheritance Houses

Mohammed, Wasan Maki, Al Nuaimi, Saad Fawzi Tuama

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.14 MB

2020

79

Microstructure and phase analysis of brazing bonds for stainless steel (AISI 316L and 431) to carbon steel (A516 G70) using a NiâSiâB filler metal alloy

Ahmed, Moussa A., Hashim, Fadhil A., Al-Mohaisen, Abdul Mohsin N.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 972 KB

2020

80

Microstructural characterization and mechanical properties development with Ti, Cr, or Ni addition for low carbon steel butt joints

Abbas, Naseer M, Al-Nadawi, Ayad Khudhair, Hassan, Kharia S

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 759 KB

2020

81

Improving the Mechanical Properties of Aluminum Alloys 6061-T6 Friction Stir Welding Joints Using Ultrasonic Peening

Naji Almohaisen, Abdul Mohsin, Hassan, Kharia Salman

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 998 KB

2020

82

Applying Carbon Nanotubes for Enhancing Fluid Flow

Shnain, Zainab Y., Alwasiti, Asawer A., Rashed, Musaab K.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 575 KB

2020

83

Erosive Wear Behavior of Jute Fiber / Polyester resin with Biowaste Materials

Mohammed, R A, Attallah, M S, Hadi, A Q

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 946 KB

2020

84

Enhancement Mechanism of the Channel for Wireless Sensor Network

hashem, Seham ahmed, Farhood, Alaa Deshar, Naji, Maham Kaml

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 594 KB

2020

85

VoIP Performance Evaluation and Capacity Estimation Using different QoS Mechanisms

Refaet, Ahmmed, Ahmed, Muhanad A., Aish, Qais., Jasim, Ali K.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 616 KB

2020

86

Photonic Antenna Design for Long Term Evolution Application

Abdualnabi, Hussein Ali, Al-Aboosi, Yasin Yousif, Sallomi, Adheed Hasan

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 380 KB

2020

87

Design of Multi-band Slotted mmWave Antenna for 5G Mobile Applications

Almashhdany, Mohammad B, Al-Ani, Oras A, Sabaawi, Ahmed M A, Altaee, Mohamed A, Hussein, Naba J, Abdelreda, Fatima A H

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 343 KB

2020

88

Recycling of Agriculture Wastes for Efficient Removal of Methyl Orange Dye Using Batch Adsorption Unit

Dakhil, Ihsan Habib

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 467 KB

2020

89

The effect of the characteristics formation of urban open space on thermal comfort for pedestrian

Ibraheem, Samer Qais, Hassan, Susan Abed

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 780 KB

2020

90

Studying Sustainable Actions of Syntactic Structures of Historic Hit Citadel: A Morphological Approach

Mohammed, Lina Raad, Alobaydi, Dhirgham

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.31 MB

2020

91

Crashworthiness behavior of aircraft sandwich structure with honeycomb core under bending load.

Sadiq, S E, Bakhy, S H, Jweeg, M J

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 775 KB

2020

92

Experimental and Numerical Investigation of Shot-Peening and Solidification Effects on the Endurance Limit of Composite Material

Abdulla, Fadhel Abbas

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 955 KB

2020

93

Investigating affecting parameters on surface roughness and metal removal rate in wire electrical discharge machining process

Shather, Saad K., Mahdi, Qussay S.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 251 KB

2020

94

Design of Ultra-Wideband MIMO Antenna for Breast Tumor Detection

Muhajr, A B, Mahdi, J f, Khadhim, M A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 788 KB

2020

95

Evaluate the effectiveness of cylindrical cooling holes embedded in arc trench over flat plate surface using infra-red technology

Ajlan, Wisam A, Daud, Harbi A, Yasin, Nabil J

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.04 MB

2020

96

Determination of Wind Shear Coefficients and Conditions of Atmospheric Stability for Three Iraqi Sites

Resen, Ali K, Khamees, Ahmed B, Yaseen, Saif F

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.12 MB

2020

97

Preface

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 812 KB

2020

98

Peer review statement

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 150 KB

2020

99

Urban Acupuncture, a Strategy for Development: Case Study of Al-Rusafa, Baghdad

Al-Hinkawi, W. Sh., Al-Saadi, S. M.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.22 MB

2020

100

Coexistance of form and structure in contemporary architecture

Hameed El-Eqapy, Ahmed Hashim, Kassid Al-Zaidy, Marwa Mohamed

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 680 KB

2020

101

The effect of cooperative learning strategy on the engagement in architectural education

Abdulwahhab, Mayyadah L, Hashim, Basim H.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 461 KB

2020

102

Functional transparency in digital architecture

Al-Majidi, Basim Hasan, Majeed, Sara Raed

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 992 KB

2020

103

Impact of FaÃ§ade Material of Mass Housing on Outdoor Thermal Comfort in Hot-arid Climate

Abrahem, Samah A., Hassan, Susan Abed, Khamees, Wurood Adeeb

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.56 MB

2020

104

The Sustainable Design Technologies in Babylonian Architecture

Abdulahaad, Enas Salim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.04 MB

2020

105

Self-sufficiency and its role in the sustainability of exhibition buildings

Mahdi, Zainab Saad

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.02 MB

2020

106

The effect of parking lots distribution arrangements on environmental noise level for the universities campuses

Hassan, Susan Abed, Ibrahim, Shatha AJ.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 823 KB

2020

107

Economic revitalization of historical paths, Analytical study of the tourist attraction property

Khalaf, R A, Abbas, S S

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 809 KB

2020

108

Manifestations of Growing in Contemporary Architecture

Saleh, Saif K, Jaafar, Ali M

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.59 MB

2020

109

Nature Simulation in Iterative Systems of Contemporary Structures

Al-Ansari, Tahreer M. S., Al-Moqaram, Asmaa.M.H.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 871 KB

2020

110

The Effect of Smart Low Emission Glass Material on Reducing Energy Consumption for Office Building in Hot Arid Climate

Taha, Hiyam Siham, Hassan, Susan Abed

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 366 KB

2020

111

Studying Flexibility and Adaptability as Key Sustainable Measures for Spaces in Dwelling Units: A Case Study in Baghdad

Aziz, Sura S., Alobaydi, Dhirgham, Salih, Amna BM

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 778 KB

2020

112

The Challenges of Smart Development in Future Iraqi Cities: Achieving Techno-Sustainability

Hasen, Maryam Mohammed, Abaas, Zaynab Radi

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 405 KB

2020

113

The spatial organization strategies of productive cities

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.33 MB

2020

114

The Role of Landscape in Achieving (Ageing in Place) within Multi-Story Housing Projects

Ibrahim, Neda K, Abbawi, Rawaa F N

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.08 MB

2020

115

Comparative Analysis of land use and urban growth modeling using geomatics technology (city of Najaf-Iraq)

Amany, A Kh., Ebraheem, Mustafa A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.71 MB

2020

116

Automation in architecture and its effect on the regeneration of traditional buildings: Al-Shawi House as a case study

Al-Tameemi, Osamah Abdulmunem, Toma, Tara A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.04 MB

2020

117

The impact of a frozen architectural heritage power on a local architecture

Al-Saidi, Adil, Al-shamari, Haitham, Kassid, Mohammed

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.03 MB

2020

118

Evaluation of curriculum quality in Architectural Academic Program, Case Study - Outcomes of Architectural Academic Program â (graduates Architects)

Rizco, Nawfal Josef, Yousif, Sajjad Yaqoob

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 404 KB

2020

119

The role of social sustainability in reviving heritage buildings in the city of Baghdad after crises

Fadhil, Halah Issa, Ashour, Ammar Salih

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.36 MB

2020

120

Hydraulic Characteristics of Flow over Submerged Dams

Shehab, Fatin Mahmoud, Jasim, Sulaiman Dawood

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.13 MB

2020

121

Performance of Thermally Insulated Reinforced Concrete Beams Strengthened with Near-Surface Mounted-Carbon Fiber Reinforced Polymer Strips under Elevated Temperature

Saeed, Ikram Ameen, Al-Attar, Tareq. S., Al-Shathr, Basil. S., Al-Mahaidi, Riadh.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 712 KB

2020

122

Analysis of Steel Multi-storey Building Subjected to Halabja Earthquake Loading

Mohammed, Aymen R., Al-Qaisee, Ghusoon S., Rashid, Bushra

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.71 MB

2020

123

Experimental and finite element analysis study of die geometrical affect the forming load during extrusion process

Shukur, Jalil J., Jaber, Adil Sh.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 646 KB

2020

124

Path Planning Optimization of a Mobile Robot based on Intelligence Algorithm

Abaas, Tahseen Fadhel, Shabeeb, Alaa Hassan

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 651 KB

2020

125

Experimental and numerical investigations for turbulent air flow characteristics of circular orifice plate

Abed, N, Hassan, H F, Al-Damook, Amer, Khalil, W H

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 843 KB

2020

126

Four Earingâs Prediction in Deep Drawing of AISI 1008 Steel Sheet Conical Product

Jweeg, Muhsin J., Mohammed, Adnan I., Jabbar, Mohammed S.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 969 KB

2020

127

Analysis of Forming Complex Cup by Drawing Process

Mohammed, Adnan I.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.08 MB

2020

128

Evaluation of Using the Ceiling and Wall Spots Ventilation System on Indoor Thermal Environment

Al-Shohani, Wisam A. M., Ahmed, Ahmed Qasim, Khaleel, Ahmed Jawad, Dakkama, Hassan J., Fayyad, Tareq Hamid

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1007 KB

2020

129

Effect of sliver filler metal alloy on bonding structure for brazing Ni270 to Ductile cast iron

Looty, Abbas F., Hashim, Fadhil A., Hussein, S K

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 721 KB

2020

130

Gait Cycle Ground Reaction Force Measurement Using Piezoelectric Sensor Attached to Shoe-Insole System

Kubba, Ammar I, Ameen, Ahmed A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 764 KB

2020

131

Building A Computerize System for Controlling and Monitoring Manufacturing Operations Based on Statistical Quality Control

Hassoon, Omar Hashim, Ibrahim, Batool, Albaghdadi, Baraa

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 963 KB

2020

132

Iraqi gasoline performance at low engine speeds

Allawi, Mohammed Kadhim, Mejbel, Mohanad Kadhim, Oudah, Mahmood Hasan

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 811 KB

2020

133

Improvement of Corrosion and Erosion Resistance Properties for Cast Iron

Ali, Muslim, Alshalal, Iqbal, Al Zubaidi, Faten N., Yousif, Ali R.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 362 KB

2020

134

Numerical stress analysis for single-lap adhesive joint under thermo-mechanical load using non-linear material

Al-Ramahi, Nawres J, Joffe, Roberts, Varna, Janis

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 882 KB

2020

135

Experimental and Numerical Study of Radiant Floor Heating Panels Performance at Different Conditions

Kassim, Muna S., Abdulghafor, Israa A., Kadhim, Husam H.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 910 KB

2020

136

Surface segmentation and reconstruction in reverse engineering

Marzoog, R J, Alduroobi, A A, Al-Zubaidy, S S

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 790 KB

2020

137

Evaluation of Green Supply Chain Management Practices Under Uncertainty Environment: Case Study in The Company for Batteries Industry

Faris, Hiam Muhammad, Maan, Harith Yarub

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.17 MB

2020

138

A Simplified Algorithm for Detecting Power Recirculation within 1-Dof Multi-Entity Planetary Gear Trains

Hussen, Hamed A., Hussain, Rahman A., Esmail, Essam L.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 293 KB

2020

139

Synthesis and characterization of porous zirconia parts by nonaqueous electrophoretic deposition technique

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.19 MB

2020

140

Modification and Refinement of Al-23Si Alloy Processed by Addition of Nano-Metal-Phosphate

Hussein, H A, kahdim, M j, Atiyah, A A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.02 MB

2020

141

Investigation the Effect of Titanium on Adhesive Wear and Hardness of NiAl-Y2O3 Composite Material

Al-Ethari, Haydar, Haleem, Ali Hubi, Al-Dulaimi, Kawthar Y.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.21 MB

2020

142

Thermal and Mechanical Properties of Polymer/Nickel Composites

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 538 KB

2020

143

Effect of Mold Vibration on Microstructure and Mechanical Properties of Al-Si Eutectic Alloy

Al-Ethari, Haydar, Haleem, Ali Hubi, Hassan, Muhanad Hamid

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.61 MB

2020

144

Derivation of a new multiscale model: II. Deriving a modified Hall-Petch relation from the multiscale model and testing it for nano, micro, and macro materials

Fadhil, Sadeem Abbas, Hassan, Mohsen A., Azeez, Jazeel H., Majeed, Munaf S.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 683 KB

2020

145

UWB Elliptical Antenna Using Fractal Geometry For Wireless Capsule Endoscopy

Hammed, Mayss Alreem N., Fayadh, Rashid A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 806 KB

2020

146

Wavelet Packet VS Backpropagation for localization and Classification PCG Signals

Abed, Wasam Samer, Fayadh, Rashid Ali

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.34 MB

2020

147

Design of smart power meter for local electrical power generators in Baghdad city

Waheib, Bushra Mahmoud, Hasan, Ihsan Jabbar, Jalil Salih, Nahla Abdul, Abdulkhaleq, Nadhir Ibrahim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 682 KB

2020

148

High Empirical Study of Edge Detection-Based Image Denoising Corrupted by the Additive White Gaussian Noise (WGN)

Al-azzawi, Alaa K

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.07 MB

2020

149

Key Exchange Protocols for Parallel Network File Systems Using Optimized Cryptography

Lafta, Inam Abdullah, Khamees, Ruaa Ali, Abdalrahman, Rana Alauldeen

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 385 KB

2020

150

A Smart Biomedical Assisted System for Alzheimer Patients

Ahmed, Qayssar A., Al-Neami, Auns Q. H.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 710 KB

2020

151

Design of Ultra-Wideband Microwave Antenna Array for Detection Breast Cancer Tumours

Ahmed, S S, Mahdi, J F, Kadhim, M A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 651 KB

2020

152

Investigating the Access Point height for an indoor IOT services

Burhan, I M, Al-Hakeem, M S, Abdulwahid, M M, Mosleh, M F

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 518 KB

2020

153

Based on Competitive Marketing: A New Framework mechanism in Social Media

Hashim, Mohammed Mahdi, Ajeel, Nidhal Khaleel, Alhamdane, Hayder Jasim, Herez, Atheer Hani, Taha, Mustafa Sabah, Ali, Adnan Hussein

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 902 KB

2020

154

Modified inverse neural controller using adaptive gain factor for DC motor

Waheed, Ali Reyadh, Issa, Abbas Hussain, Hassan, Mohammed Y

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 789 KB

2020

155

Hand Gesture Recognition Using Mechanomyography Signal Based on LDA Classifier

Buk, Aymen Al Yahyah, Wali, Mousa K, Al-Timemy, Ali H., Raoof, Koasi

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 445 KB

2020

156

Optimal location of UPFC devices for minimizing Losses in Transmission Line

Amin, Ihssan A, Mahmood, Dhari Y, Numan, Ali H

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 784 KB

2020

157

Design Low Power Detection QPSK-Transceiver for UWB Techniques

Hamid, Hamood Shehab, Mohammed, Mohammed Saeed, Mustafa, Omar Ibrahim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 445 KB

2020

158

Interval type-2 and type-1 Fuzzy Logic Controllers for congestion avoidance in internet routers

Kadhim, Hanan M, Oglah, Ahmed A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1024 KB

2020

159

Performance Evaluation of a Campus HotSpot Network in Baghdad

Habeeb, Habeeb.S., Al_Yasiri, Hayam A., Al_Nakkash, Aseel.H.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 701 KB

2020

160

Design and Software Implementation of Multilevel Diode Clamped Converter

Shyaa, Suha S, Hassan, Raaed F

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 702 KB

2020

161

Improvement the Performance of MIMO Channel Employing Concatenation (BCH âSTBC) Codes.

Thaher, Raad H., Abed, Muntadher S.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 815 KB

2020

162

Design and Implementation a New Real Time Overcurrent Relay Based on Arduino MEGA

Hameed, Ali Abdulsattar, Sultan, Ahmed Jasim, Booneya, Mehdi F.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 645 KB

2020

163

Analysis of Interference and Signal Quality in Cellular Wireless Networks

Al-Jaff, Sazan, Bayat, Oguz, Sallomi, Adheed Hassan

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 545 KB

2020

164

Low Complexity Rate Compatible Puncturing For Future Communication network

Aftan, Ahmed Obaid, Sadiq, Muhammed Salah, Alnasrawi, Mukhalad, Aljanabi, Mohanad, Jumaa, Fadhel A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 415 KB

2020

165

Texture Analysis of Mammogram Using Histogram of Oriented Gradients Method

Farhan, Athraa H., Kamil, Mohammed Y.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 550 KB

2020

166

Adaptive Fuzzy Logic Control of Hybrid, Active Power Filters, for Harmonic Mitigation

Yasin, Mohammed W., Abdullah Al Bakry, Ali Abdul Abbas, Sultan, Ahmed Jasim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 915 KB

2020

167

Blade Shape Optimization of Savonius Wind Turbine at Low Wind Energy by Artificial Neural network

Al-Shammari, Sarah Ali, Karamallah, Abdul Hassan, Aljabair, Sattar

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.82 MB

2020

168

The effect of aspect ratio on heat transfer in a square cavity filled with a porous medium

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 940 KB

2020

169

Experimental Evaluation of Fresnelâs lens solar concentrator in Iraq

Obaid, Ahmed H., Sahlani, Assaad Al, Eidan, Adel A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 884 KB

2020

170

Fabrication of magnetic water system for drip irrigation by using solar energy

Naser, Kadhim Fadhil, Al-Hamadani, Haider, Waroish, Mustafa H., Mahmood, Haider F.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 842 KB

2020

171

Design of a Smart Energy Management System for Photovoltaic Stand-Alone Building

Abbas, Alaa Kh, Obed, Adel A, Abid, Ahmed J

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.14 MB

2020

172

The Optimum Theoretical Design of Ranque-Hilsch Vortex Tube by using a Technique of Multiple Attribute Decision Making

Alwan, Fouad, Taha, Abdual Wahab A., Dawood, Qasim Abbas

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 702 KB

2020

173

Numerical Investigation of 2D Turbulent Flow past a Circular Cylinder at Lower Subcritical Reynolds Number

Sowoud, K M, Al-Filfily, A A, Abed, B H.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 970 KB

2020

174

Numerical Modelling of Fluid Flow and Heat Transfer of (TiO 2 -Water) Nanofluids in Wavy duct

Ghadhban, Safaa A., Abid Aun, Salah Haji, Jehhef, Kadhum Audaa

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.69 MB

2020

175

Numerical study for the ventilation with solar chimney under effect of different location and the shape of the section opening window

Mohamed, Ahamed Q., Alshara, Ahmed K, Mitlaik, Hussein M.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.47 MB

2020

176

Effect of calcium carbonate treated crumb rubber and oil palm fruit fibre on the mechanical properties of mortar

Sharba, Amjad A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 688 KB

2020

177

The application of six sigma - supported expert system in construction projects

Salih, Mohammed A M, Mahmoud, Awss H, Khalaf, Batool A

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.12 MB

2020

178

Characteristics of Selected Off-Street Parking in AL-Mansour Neighborhood / Baghdad

Al-Tamimi, Ali M, Asmael, Noor Moutaz

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 608 KB

2020

179

The reasons and proposed treatments for the housing problem in Iraq

Jumaah, Intissar Kadori, Mesrop, Seda Sarkis, Mohammed, Thaer Jasim

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 595 KB

2020

180

Calculating the Vertical Displacement using the Method of Least Squares Adjustment and 3D Objects Fitting

Abdulateef, Nagham A., Khalaf, Yousif H., Al-Bakri, M

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 610 KB

2020

181

Mechanical and sustainability assessment of induction heatable asphalt tiles and asphalt pellets in road maintenance

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.51 MB

2020

182

Effect of Palm Fibers on Asphalt Pavement Properties

Aljubory, Ahmed, Abbas, Alaa Saadi, Bdan, A F

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 803 KB

2020

183

Enhanced asphalt mixture behavior by using khawa clay to resist deformation

Abedali, Abdulhaq Hadi, Hameed, Ebtehal Khalid

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.05 MB

2020

184

Optimization of Eco-friendly Pavement Concrete Mixture Using Response Surface Methodology

Al-Fahdawi, Jasim Z., Banyhussan, Qais Sahib

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 774 KB

2020

185

Management of Natural Iraqi Water Resources, Aims And Challenges

Elaiwi, Ala H., Hasan, Karima, Al-Hadithi, Mufid

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 410 KB

2020

186

Selection of water harvesting sites in Horan valley

Ahmed, Ali Dahham, Abdulhameed, Isam M., Ghani, Emad T. Abdel, Ibrahim, Muthanna K.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.45 MB

2020

187

Assessment of Groundwater Quality Using Correlation Matrix in Humaydat-Region, Mosul, Iraq

Rahman, Eman A.

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 1.01 MB

2020

188

Performance of Oil on Bio-Methane Creation under Anaerobic Co-Fermentation Condition. Review

Alhraishawi, A A., Alani, W K, Chaichan, M T, Jawad, R S

Journal:

IOP Conference Series Materials Science and Engineering

Year:

2020

File:

PDF, 523 KB

2020

To build up a library is to create a life. It’s never just a random collection of books.

— Carlos María Domínguez

Official channel

Z-Library Desktop Launcher

Tor version

Z-Library

Z-Library Since 2009 support@z-lib.do

EnglishРусскийEspañolItalianoελληνικάاللغة العربيةBahasa IndonesiaBahasa Malaysiaहिन्दीDeutschFrançaisPortuguêsУкраїнськаPolski中文繁體中文日本語Tiếng ViệtAzərbaycan DiliՀայոց լեզուภาษาไทยTürk Diliქართველიবাংলাپښتوతెలుగుاردو한국어SrpskiБългарски