Volume 50

Materials & Design

Volume 50

1

Characterization of borided Incoloy 825 alloy

Aytekin, Halil, Akçin, Yelda

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 5.79 MB

english, 2013

2

Energy absorption efficiency of carbon fiber reinforced polymer laminates under high velocity impact

Wang, Bing, Xiong, Jian, Wang, Xiaojun, Ma, Li, Zhang, Guo-Qi, Wu, Lin-Zhi, Feng, Ji-Cai

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 980 KB

english, 2013

3

Reinforced concrete beams strengthened with carbon fiber reinforced polymer by friction hybrid bond technique: Experimental investigation

Zhou, Yinzhi, Gou, Mingkang, Zhang, Fengyu, Zhang, Shoujun, Wang, Dan

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.93 MB

english, 2013

4

Experimental and numerical investigation of residual stresses around cold extrusion hole of ultrahigh strength steel

Zhao, Chunmei, Hu, Hongyan, Zhou, Yefei, Gao, Yukui, Ren, Xunjun, Yang, Qingxiang

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 933 KB

english, 2013

5

A critical study of the emergence of glass and glassy metals as “green” materials

Edwards, Kevin L., Axinte, Eugen, Tabacaru, Lucian L.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.08 MB

english, 2013

6

Investigation on the corrosion behavior of aluminum alloys 3A21 and 7A09 in chloride aqueous solution

Wang, Bin, Zhang, Lunwu, Su, Yan, Mou, Xianliang, Xiao, Yong, Liu, Jie

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.30 MB

english, 2013

7

The optimum combination of tool rotation rate and traveling speed for obtaining the preferable corrosion behavior and mechanical properties of friction stir welded AA5052 aluminum alloy

Bagheri Hariri, Mohiedin, Gholami Shiri, Sajad, Yaghoubinezhad, Yadollah, Mohammadi Rahvard, Masoud

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.83 MB

english, 2013

8

Novel fibers preparation technique for manufacturing of rice straw based fiberboards and their characterization

El-Kassas, A.M., Mourad, A-H.I.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 675 KB

english, 2013

9

Pine cone fiber/clay hybrid composite: Mechanical and thermal properties

Arrakhiz, F.Z., Benmoussa, K., Bouhfid, R., Qaiss, A.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 800 KB

english, 2013

10

Response surface modeling and optimization of a new impact-toughened mould material used in the shaping of sanitary ware

Qian, Li, Ping, Yu, Yunbai, Luo

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.08 MB

english, 2013

11

Static and dynamic mechanical properties of alkali treated unidirectional continuous Palmyra Palm Leaf Stalk Fiber/jute fiber reinforced hybrid polyester composites

Shanmugam, D., Thiruchitrambalam, M.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1017 KB

english, 2013

12

Improving performance of low-temperature hydrogenated acrylonitrile butadiene rubber nanocomposites by using nano-clays

Zhang, Jihua, Wang, Lifeng, Zhao, Yunfeng

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.46 MB

english, 2013

13

Equivalent continuum models of carbon nanotube reinforced polypropylene composites

Huang, Jun, Rodrigue, Denis

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.93 MB

english, 2013

14

Microstructure and mechanical properties of AISI 347 stainless steel/A335 low alloy steel dissimilar joint produced by gas tungsten arc welding

Hajiannia, I., Shamanian, M., Kasiri, M.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.81 MB

english, 2013

15

Effect of welding speed on microstructure and mechanical properties of self-reacting friction stir welded 6061-T6 aluminum alloy

Liu, H.J., Hou, J.C., Guo, H.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.62 MB

english, 2013

16

In situ rolling friction stir welding for joining AA2219

Huang, Yongxian, Wan, Long, Lv, Shixiong, Zhang, Jian, Fu, Guansheng

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.22 MB

english, 2013

17

Fatigue crack growth rate behaviour of friction-stir aluminium alloy AA2024-T3 welds under transient thermal tensioning

Ilman, M.N., Kusmono,, Iswanto, P.T.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.92 MB

english, 2013

18

Effect of backplate diffusivity on microstructure and mechanical properties of friction stir welded joints

Zhang, Zhihan, Li, Wenya, Shen, Junjun, Chao, Y.J., Li, Jinglong, Ma, Yu-E.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.08 MB

english, 2013

19

Efficiency and sensitivity of linear and non-linear ultrasonics to identifying micro and macro-scale defects in concrete

Shah, A.A., Ribakov, Y., Zhang, Ch.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.16 MB

english, 2013

20

Mechanical properties of multi-walled carbon nanotube/epoxy polysulfide nanocomposite

Shirkavand Hadavand, Behzad, Mahdavi Javid, Kimya, Gharagozlou, Mehrnaz

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 834 KB

english, 2013

21

Microstructures and tensile properties of Mg–Gd–Y–Zr alloy during multidirectional forging at 773K

Tang, Liechong, Liu, Chuming, Chen, Zhiyong, Ji, Dawei, Xiao, Hongchao

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.87 MB

english, 2013

22

The thermal stability of high-energy ball-milled nanostructured Cu

Tao, J.M., Zhu, X.K., Scattergood, R.O., Koch, C.C.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 573 KB

english, 2013

23

Hystoelastic deformation behaviour of geometrically graded NiTi shape memory alloys

Shariat, Bashir S., Liu, Yinong, Rio, Gerard

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.04 MB

english, 2013

24

A comparative study on low-velocity impact response of fabric composite laminates

Zhang, Diantang, Sun, Ying, Chen, Li, Pan, Ning

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.42 MB

english, 2013

25

Properties of high specific strength Al–4wt.% Al2O3/B4C nano-composite produced by accumulative roll bonding process

Alizadeh, Morteza, beni, Hossein Akbari, Ghaffari, Mohammad, Amini, Rasool

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 937 KB

english, 2013

26

Effect of environment atmosphere on thermal shock resistance of the ZrB2–SiC–graphite composite

Jin, Hua, Meng, Songhe, Zhu, Yanwei, Zhou, Yinjia

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.73 MB

english, 2013

27

Improved shape memory composites combined with TiNi wire and shape memory epoxy

Feng, Xue, Zhao, Limin, Mi, Xujun, Li, Yanfeng, Xie, Haofeng, Yin, Xiangqian, Gao, Baodong

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 737 KB

english, 2013

28

A different approach for considering the effect of non-proportional loading path on the forming limit diagram of AA5083

Zhalehfar, F., Hosseinipour, S.J., Nourouzi, S., Gorji, A.H.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.99 MB

english, 2013

29

Functional properties of biodegradable corn starch nanocomposites for food packaging applications

Heydari, Amir, Alemzadeh, Iran, Vossoughi, Manouchehr

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1015 KB

english, 2013

30

The influence of multiscale fillers reinforcement into impact resistance and energy absorption properties of polyamide 6 and polypropylene nanocomposite structures

Silva, Francesco, Njuguna, James, Sachse, Sophia, Pielichowski, Krzysztof, Leszczynska, Agnieszka, Giacomelli, Marco

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.27 MB

english, 2013

31

Fabrication and characterization of elastomeric scaffolds comprised of a citric acid-based polyester/hydroxyapatite microcomposite

Moradi, Ali, Dalilottojari, Adel, Pingguan-Murphy, Belinda, Djordjevic, Ivan

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.15 MB

english, 2013

32

Experimental characterization and numerical modeling of micromechanical damage under different stress states

Achouri, Mohamed, Germain, Guenael, Dal Santo, Philippe, Saidane, Delphine

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 5.40 MB

english, 2013

33

Failure analysis and mechanical performance of an oil pipeline

Alamilla, J.L., Sosa, E., Sánchez-Magaña, C.A., Andrade-Valencia, R., Contreras, A.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.87 MB

english, 2013

34

Study on the effect of cooling rate on the solidification parameters, microstructure, and mechanical properties of LM13 alloy using cooling curve thermal analysis technique

Hosseini, V.A., Shabestari, S.G., Gholizadeh, R.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.53 MB

english, 2013

35

Urea formaldehyde impregnated oil palm trunk as the core layer for three-layered board

H’ng, P.S., Chai, L.Y., Chin, K.L., Tay, P.W., Eng, H.K., Wong, S.Y., Wong, W.Z., Chow, M.J., Chai, E.W.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 253 KB

english, 2013

36

Effects of the thickness of Cu filler metal on the microstructure and properties of laser-welded TiNi alloy and stainless steel joint

Li, Hongmei, Sun, Daqian, Gu, Xiaoyan, Dong, Peng, Lv, Zhanping

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 5.74 MB

english, 2013

37

Optimization based simulation of self-expanding Nitinol stent

Azaouzi, M., Lebaal, N., Makradi, A., Belouettar, S.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.60 MB

english, 2013

38

Transient liquid phase bonding of wrought IN718 nickel based superalloy using standard heat treatment cycles: Microstructure and mechanical properties

Pouranvari, M., Ekrami, A., Kokabi, A.H.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.72 MB

english, 2013

39

Friction Riveting of glass–fibre-reinforced polyetherimide composite and titanium grade 2 hybrid joints

Blaga, L., Bancilă, R., dos Santos, J.F., Amancio-Filho, S.T.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 873 KB

english, 2013

40

A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis

Kumar, Ravinder, Dhiman, Suresh

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.31 MB

english, 2013

41

Deflection hardening behaviour of short fibre reinforced fly ash based geopolymer composites

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.89 MB

english, 2013

42

Effect of deformation temperature on mechanical properties of ultrafine grained Al–Mg alloys processed by rolling

Singh, Dharmendra, Rao, P. Nageswara, Jayaganthan, R.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.00 MB

english, 2013

43

Utilizing recycled ceramic aggregates obtained from tile industry in the design of open graded wearing course on both laboratory and in situ basis

Silvestre, Ramón, Medel, Esther, García, Alfredo, Navas, José

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.21 MB

english, 2013

44

On modeling the abrasive wear characteristics of in situ Al–12%Si/TiC composites

Yigezu, Belete Sirahbizu, Mahapatra, M.M., Jha, P.K.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.43 MB

english, 2013

45

Tribological characteristics of innovative Al6061–carbon fiber rod metal matrix composites

Ramesh, C.S., Adarsha, H., Pramod, S., Khan, Zulfiqar

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.78 MB

english, 2013

46

Deformation mechanisms and dynamic recrystallization of AZ31 Mg alloy with different initial textures during hot tension

Li, Nali, Huang, Guangjie, Zhong, Xiaoyu, Liu, Qing

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 8.60 MB

english, 2013

47

Analysis of the adhesive failure in bonded composite repair of aircraft structures using modified damage zone theory

Fari Bouanani, M., Benyahia, F., Albedah, A., Aid, A., Bachir Bouiadjra, B., Belhouari, M., Achour, T.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1016 KB

english, 2013

48

Hot deformation behavior of two C–Mn–Si based and C–Mn–Al based microalloyed high-strength steels: A comparative study

Wei, Hai-lian, Liu, Guo-quan, Zhao, Hai-tao, Kang, Ren-mu

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.41 MB

english, 2013

49

Characterization of date palm lignocellulosic by-products and self-bonded composite materials obtained thereof

Saadaoui, Nabila, Rouilly, Antoine, Fares, Khalid, Rigal, Luc

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.11 MB

english, 2013

50

An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat thin-walled parts by injection moulding process

Azaman, M.D., Sapuan, S.M., Sulaiman, S., Zainudin, E.S., Abdan, K.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.58 MB

english, 2013

51

Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites

Sapuan, S.M., Pua, Fei-ling, El-Shekeil, Y.A., AL-Oqla, Faris M.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 851 KB

english, 2013

52

Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel

Guan, Kai, Wang, Zemin, Gao, Ming, Li, Xiangyou, Zeng, Xiaoyan

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.69 MB

english, 2013

53

Effects of virgin Ethylene–Propylene–Diene–Monomer and its preheating time on the properties of natural rubber/recycled Ethylene–Propylene–Diene–Monomer blends

Nabil, H., Ismail, H., Azura, A.R.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.71 MB

english, 2013

54

Compaction of Ti–6Al–4V powder using high velocity compaction technique

Khan, Dil Faraz, Yin, Haiqing, Li, He, Qu, Xuanhui, Khan, Matiullah, Ali, Shujaat, Iqbal, M. Zubair

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.33 MB

english, 2013

55

Microstructure, thermal and mechanical response of AZ51/Al2O3 nanocomposite with 2wt.% Ca addition

Alam, Md. Ershadul, Hamouda, Abdel Magid Salem, Gupta, Manoj

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.31 MB

english, 2013

56

Residual stresses in Linear Friction Welding of aluminium alloys

Song, X., Xie, M., Hofmann, F., Jun, T.S., Connolley, T., Reinhard, C., Atwood, R.C., Connor, L., Drakopoulos, M., Harding, S., Korsunsky, A.M.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.53 MB

english, 2013

57

Regeneration technique for welding nanostructured bainite

Fang, K., Yang, J.G., Liu, X.S., Song, K.J., Fang, H.Y., Bhadeshia, H.K.D.H.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.84 MB

english, 2013

58

Tensile strength, oxidation resistance and wettability of carbon fibers coated with a TiC layer using a molten salt method

Dong, Z.J., Li, X.K., Yuan, G.M., Cui, Z.W., Cong, Y., Westwood, A.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.62 MB

english, 2013

59

Microstructure and tensile strength of friction stir welded joints between interstitial free steel and commercially pure aluminium

Kundu, S., Roy, D., Bhola, R., Bhattacharjee, D., Mishra, B., Chatterjee, S

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.70 MB

english, 2013

60

Numerical modelling, prediction of Cu–W nano powder composite in dry sliding wear condition using response surface methodology

Vettivel, S.C., Selvakumar, N., Narayanasamy, R., Leema, N.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 6.56 MB

english, 2013

61

High strength weld metal design through nanoscale copper precipitation

Wang, Honghong, Yu, Xinghua, Isheim, D., Seidman, D., Babu, S.S.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.89 MB

english, 2013

62

Effects of nano-Al2O3 particles on microstructure and mechanical properties of Sn3.5Ag0.5Cu composite solder ball grid array joints on Sn/Cu pads

Tsao, L.C., Wu, R.W., Cheng, Te-Hsien, Fan, Kuo-Huan, Chen, R.S.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.95 MB

english, 2013

63

Investigation of microstructure and mechanical properties of novel Sn–0.5Ag–0.7Cu solders containing small amount of Ni

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.19 MB

english, 2013

64

Effect of anodizing treatment on the very high cycle fatigue behavior of 2A12-T4 aluminum alloy

Nie, Baohua, Zhang, Zheng, Zhao, Zihua, Zhong, Qunpeng

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.23 MB

english, 2013

65

Hybrid lattice-core sandwich composites designed for microwave absorption

Yang, Lin, Fan, Hualin, Liu, Jun, Ma, Yao, Zheng, Qing

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.27 MB

english, 2013

66

Selection of boron based tribological hard coatings using multi-criteria decision making methods

Çalışkan, Halil

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 418 KB

english, 2013

67

Effects of vanadium on the microstructure and mechanical properties of a high strength low alloy martensite steel

Yang, Gengwei, Sun, Xinjun, Li, Zhaodong, Li, Xiaoxian, Yong, Qilong

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.69 MB

english, 2013

68

Reciprocating wear resistance of Al–SiC nano-composite fabricated by accumulative roll bonding process

Darmiani, E., Danaee, I., Golozar, M.A., Toroghinejad, M.R., Ashrafi, A., Ahmadi, A.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.89 MB

english, 2013

69

Study on welding process and prosperities of AA5754 Al-alloy welded by double pulsed gas metal arc welding

Liu, Anhua, Tang, Xinhua, Lu, Fenggui

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.66 MB

english, 2013

70

Ballistic resistance of spaced multi-layer plate structures: Experiments on Fibre Reinforced Plastic targets and an analytical framework for calculating the ballistic limit

Wielewski, Euan, Birkbeck, Alan, Thomson, Ron

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 711 KB

english, 2013

71

Characterization of D2 tool steel friction surfaced coatings over low carbon steel

Sekharbabu, R., Rafi, H. Khalid, Rao, K. Prasad

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.63 MB

english, 2013

72

Reinforcement and antioxidation effects of antioxidant functionalized silica in styrene–butadiene rubber

Pan, Qiwei, Wang, Bingbing, Chen, Zhaohui, Zhao, Jianqing

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.45 MB

english, 2013

73

An improved constitutive description of tensile behavior for CP-Ti at ambient and intermediate temperatures

Peng, Jian, Zhou, Chang-Yu, Dai, Qiao, He, Xiao-Hua

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.40 MB

english, 2013

74

Properties of halloysite nanotubes-filled natural rubber prepared using different mixing methods

Ismail, H., Salleh, S.Z., Ahmad, Z.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.09 MB

english, 2013

75

Influence of different colour pigments on the properties of powder deposited organic coatings

Rossi, Stefano, Fedel, Michele, Deflorian, Flavio, Zanol, Stefano

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.93 MB

english, 2013

76

An experimental survey on combined effects of fibers and nanosilica on the mechanical, rheological, and durability properties of self-compacting concrete

Beigi, Morteza H., Berenjian, Javad, Lotfi Omran, Omid, Sadeghi Nik, Aref, Nikbin, Iman M.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.21 MB

english, 2013

77

An analysis on effect of multipass twist extrusion process of AA6061 alloy

Mohammed Iqbal, U., Senthil Kumar, V.S.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.16 MB

english, 2013

78

Structural analysis of continuous fiber wound composite impellers of a multistage high-speed counter rotating axial compressor for compressing water vapor (R-718) as refrigerant using Finite Element Analysis

Patil, Mohit, Müller, Norbert

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 5.46 MB

english, 2013

79

Investigation of tension and compression behavior of AZ80 magnesium alloy

Fereshteh-Saniee, F., Fallah-Nejad, Kh., Beheshtiha, A.Sh., Badnava, H.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.97 MB

english, 2013

80

Prediction of flow stress in a wide temperature range involving phase transformation for as-cast Ti–6Al–2Zr–1Mo–1V alloy by artificial neural network

Quan, Guo-zheng, Lv, Wen-quan, Mao, Yuan-ping, Zhang, Yan-wei, Zhou, Jie

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.77 MB

english, 2013

81

Constitutive equations for high temperature flow stress of TC4-DT alloy incorporating strain, strain rate and temperature

Peng, Xiaona, Guo, Hongzhen, Shi, Zhifeng, Qin, Chun, Zhao, Zhanglong

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.14 MB

english, 2013

82

Study on reinforced lightweight coconut shell concrete beam behavior under shear

Gunasekaran, K., Annadurai, R., Kumar, P.S.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.48 MB

english, 2013

83

The effect of drying condition of glassfibre core material on the thermal conductivity of vacuum insulation panel

Li, Cheng-Dong, Duan, Zheng-Cai, Chen, Qing, Chen, Zhao-Feng, Boafo, Fred Edmond, Wu, Wang-Ping, Zhou, Jie-Ming

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.24 MB

english, 2013

84

The mechanism of anneal-hardening phenomenon in extruded Zn–Al alloys

Zhang, Yangming, Yang, Lijing, Zeng, Xuduo, Zheng, Bizhang, Song, Zhenlun

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.20 MB

english, 2013

85

Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process

Kantaros, Antreas, Karalekas, Dimitris

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 686 KB

english, 2013

86

Effect of mixed adhesive joints and tapered plate on stresses in retrofitted beams bonded with a fiber-reinforced polymer plate

Bouchikhi, A.S., Megueni, A., Gouasmi, S., Boukoulda, F.B.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.08 MB

english, 2013

87

Wear behaviours of Pb added Mg–Al–Si composites reinforced with in situ Mg2Si particles

Çiçek, Bünyamin, Ahlatçı, Hayrettin, Sun, Yavuz

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.69 MB

english, 2013

88

Effect of martensite volume fraction on stress triaxiality and deformation behavior of dual phase steel

Paul, Surajit Kumar

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.26 MB

english, 2013

89

Effect of 10Ce-TZP/Al2O3 nanocomposite particle amount and sintering temperature on the microstructure and mechanical properties of Al/(10Ce-TZP/Al2O3) nanocomposites

Soltani, N., Pech-Canul, M.I., Bahrami, A.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.74 MB

english, 2013

90

Influence of copper and molybdenum on dry sliding wear behaviour of sintered plain carbon steel

Kandavel, T.K., Chandramouli, R., Manoj, M., Manoj, B., Gupta, Deepak Kumar

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.11 MB

english, 2013

91

Enhanced mechanical properties induced by refined heat treatment for 9Cr–0.5Mo–1.8W martensitic heat resistant steel

Wang, S.S., Peng, D.L., Chang, L., Hui, X.D.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.51 MB

english, 2013

92

Effect of stitching angle on mechanical properties of stitched sandwich panels

Shigang, Ai, Yiqi, Mao, Yongmao, Pei, Daining, Fang, Liqun, Tang

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.06 MB

english, 2013

93

Application of neural networking for fatigue limit prediction of powder metallurgy steel parts

Lotfi, Behnam, Beiss, Paul

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 767 KB

english, 2013

94

Inside Front Cover (Editorial Board)

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 30 KB

english, 2013

95

Multi-axial fatigue in magnetorheological elastomers using bubble inflation

Zhou, Yanfen, Jerrams, Stephen, Chen, Lin

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 985 KB

english, 2013

96

Mechanical behaviour of jute cloth/wool felts hybrid laminates

Santulli, C., Sarasini, F., Tirillò, J., Valente, T., Valente, M., Caruso, A.P., Infantino, M., Nisini, E., Minak, G.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.75 MB

english, 2013

97

Scanning velocity influence on microstructure, microhardness and wear resistance performance of laser deposited Ti6Al4V/TiC composite

Mahamood, Rasheedat M., Akinlabi, Esther T., Shukla, Mukul, Pityana, Sisa

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.15 MB

english, 2013

98

Effects of electrode force on microstructure and mechanical behavior of the resistance spot welded DP600 joint

Zhao, D.W., Wang, Y.X., Zhang, L., Zhang, P.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.93 MB

english, 2013

99

Structure and microstructure evolution of a ternary Fe–Cr–Ni alloy akin to super martensitic stainless steel

Ravi Kumar, B., Sharma, Sailaja, Munda, Parikshit, Minz, R.K.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.17 MB

english, 2013

100

Tailoring microstructures: A technical note on an eco-friendly approach to weight reduction through heat treatment

Prawoto, Y., Djuansjah, J.R.P., Tawi, K.B., Fanone, M.M.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.13 MB

english, 2013

101

Tribological behaviour of near β titanium alloy as a function of α+β solution treatment temperature

Setti, Srinivasu Gangi, Rao, R.N.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.33 MB

english, 2013

102

Insight into the shear behaviour of composite sandwich panels with foam core

Mostafa, A., Shankar, K., Morozov, E.V.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.12 MB

english, 2013

103

In situ melting and solidification assessment of AZ91D granules by computer-aided thermal analysis during investment casting process

Jafari, Hassan, Idris, Mohd Hasbullah, Ourdjini, Ali, Farahany, Saeed

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.35 MB

english, 2013

104

The effect of water to cement ratio on fracture parameters and brittleness of self-compacting concrete

Beygi, Morteza H.A., Kazemi, Mohammad T., Nikbin, Iman M., Amiri, Javad. Vaseghi

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.73 MB

english, 2013

105

The characterization investigation of laser-arc-adhesive hybrid welding of Mg to Al joint using Ni interlayer

Wang, Hongyang, Liu, Liming, Liu, Fei

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.74 MB

english, 2013

106

Interfacial microstructure and mechanical properties of diffusion bonded TC4/0Cr18Ni9/Oxygen Free Copper joints

Shen, Qiang, Xiang, Huiying, Luo, Quoqiang, Su, Xiaopeng, Zhang, Lianmeng

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.12 MB

english, 2013

107

Experimental and numerical analysis of thermal shock damages to alumina based ceramic disk samples

Dimitrijević, Marija M., Medjo, Bojan, Jančić Heinemann, Radmila, Rakin, Marko, Volkov-Husović, Tatjana

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.98 MB

english, 2013

108

Optimal multi-material selection for lightweight design of automotive body assembly incorporating recyclability

Sakundarini, Novita, Taha, Zahari, Abdul-Rashid, Salwa Hanim, Ghazila, Raja Ariffin Raja

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.66 MB

english, 2013

109

Influence of pre-torsion deformation on microstructures and properties of cold drawing pearlitic steel wires

Guo, Ning, Luan, Baifeng, Liu, Qing

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.72 MB

english, 2013

110

Influence of different rolling routes on the microstructure evolution and properties of AZ31 magnesium alloy sheets

Zhang, Hua, Huang, Guangsheng, Roven, Hans Jørgen, Wang, Lifei, Pan, Fusheng

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.86 MB

english, 2013

111

Fabrication and study of pipe-gridded porous metal

Zhu, Chunsheng, Li, Yanyin, Guo, Ce, Dai, Zhendong

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.76 MB

english, 2013

112

Out-of-plane impact resistance of aluminium plates subjected to low velocity impacts

Mohotti, Damith, Ali, Muneeb, Ngo, Tuan, Lu, Jinghan, Mendis, Priyan, Ruan, Dong

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.86 MB

english, 2013

113

Computational evaluation of resistance of fracture capacity for SUS304L of liquefied natural gas insulation system under cryogenic temperatures using ABAQUS user-defined material subroutine

Kim, Seul-Kee, Lee, Chi-Seung, Kim, Jeong-Hyeon, Kim, Myung-Hyun, Lee, Jae-Myung

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.25 MB

english, 2013

114

Mechanical and tribological properties of self-lubricating laminated composites with flexible design

Zhang, Dongya, Lin, Ping, Dong, Guangneng, Zeng, Qunfeng

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 3.25 MB

english, 2013

115

Influence of interface waviness on delamination characteristics and correlation of through-thickness tensile failure with mode I energy release rates in carbon fibre textile composites

Hufenbach, W., Hornig, A., Gude, M., Böhm, R., Zahneisen, F.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.20 MB

english, 2013

116

Assessment of the effect of the through-thickness strain/stress gradient on the formability of stretch-bend metal sheets

Morales-Palma, Domingo, Vallellano, Carpóforo, García-Lomas, Francisco J.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.81 MB

english, 2013

117

Macadamia (Macadamia integrifolia) shell and castor (Rícinos communis) oil based sustainable particleboard: A comparison of its properties with conventional wood based particleboard

Wechsler, A., Zaharia, M., Crosky, A., Jones, H., Ramírez, M., Ballerini, A., Nuñez, M., Sahajwalla, V.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 861 KB

english, 2013

118

Constitutive modeling for flow stress of 55SiMnMo bainite steel at hot working conditions

Yan, Tao, Yu, Enlin, Zhao, Yuqian

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 577 KB

english, 2013

119

Eddy current nondestructive evaluation of dual phase steel

Ghanei, Sadegh, Kashefi, Mehrdad, Mazinani, Mohammad

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.13 MB

english, 2013

120

Impact of beryllium additions on thermal and mechanical properties of conventionally solidified and melt-spun Al–4.5wt.%Mn–xwt.%Be (x=0, 1, 3, 5) alloys

Öz, Turan, Karaköse, Ercan, Keskin, Mustafa

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 5.69 MB

english, 2013

121

Effect of pore structure on the compressive property of porous Ti produced by powder metallurgy technique

Li, B.Q., Wang, C.Y., Lu, X.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.10 MB

english, 2013

122

Microstructures and mechanical properties of cast austenite stainless steels after long-term thermal aging at low temperature

Li, Shilei, Wang, Yanli, Li, Shuxiao, Zhang, Hailong, Xue, Fei, Wang, Xitao

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 4.16 MB

english, 2013

123

Very high cycle fatigue behavior of shot-peened 3Cr13 high strength spring steel

Nie, Baohua, Zhang, Zheng, Zhao, Zihua, Zhong, Qunpeng

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.71 MB

english, 2013

124

Springback prediction in sheet metal forming of high strength steels

Chongthairungruang, B., Uthaisangsuk, V., Suranuntchai, S., Jirathearanat, S.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 6.63 MB

english, 2013

125

Experimental investigation on the tensile behavior of polyurea at high strain rates

Raman, S.N., Ngo, T., Lu, J., Mendis, P.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 1.43 MB

english, 2013

126

Early decomposition of supersaturated solid solutions of Al–Zn–Mg casting alloys

Dellah, M., Bournane, M., Ragab, Kh.A., Sadaoui, Y., Sirenko, A.F.

Journal:

Materials & Design

Year:

2013

Language:

english

File:

PDF, 2.44 MB

english, 2013