Volume 59

Materials & Design

Volume 59

1

Optimization of tribological parameters in abrasive wear mode of carbon-epoxy hybrid composites

Ramesh, B.N., Suresha, B.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.50 MB

english, 2014

2

Compressive strength and microstructural analysis of fly ash/palm oil fuel ash based geopolymer mortar

Ranjbar, Navid, Mehrali, Mehdi, Behnia, Arash, Alengaram, U. Johnson, Jumaat, Mohd Zamin

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.77 MB

english, 2014

3

Mechanical behavior and wear prediction of stir cast Al–TiB2 composites using response surface methodology

Suresh, S., Shenbaga Vinayaga Moorthi, N., Vettivel, S.C., Selvakumar, N.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 5.34 MB

english, 2014

4

An alternative method for manufacturing high-strength CP Ti–SiC composites by accumulative roll bonding process

Karimi, Mohsen, Toroghinejad, Mohammad Reza

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.96 MB

english, 2014

5

Low cycle fatigue and mechanical properties of magnesium alloy Mg–6Zn–1Y–0.6Ce–0.6Zr at different temperatures

Čanađija, Marko, Guo, Xuefeng, Lanc, Domagoj, Yang, Wenpeng, Brnić, Josip

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.91 MB

english, 2014

6

Prediction of fatigue life in aircraft double lap bolted joints using several multiaxial fatigue criteria

Esmaeili, F., Chakherlou, T.N., Zehsaz, M.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.33 MB

english, 2014

7

Microstructure and surface mechanical property of AZ31 Mg/SiCp surface composite fabricated by Direct Friction Stir Processing

Huang, Yongxian, Wang, Tianhao, Guo, Weiqiang, Wan, Long, Lv, Shixiong

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.51 MB

english, 2014

8

On the mechanical characterization of carbon nanotube reinforced epoxy adhesives

Wernik, J.M., Meguid, S.A.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 4.25 MB

english, 2014

9

Effect of tool pin profile on microstructure and mechanical properties of friction stir welded AZ31B magnesium alloy

Motalleb-nejad, P., Saeid, T., Heidarzadeh, A., Darzi, Kh., Ashjari, M.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.94 MB

english, 2014

10

The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete

Ghafari, Ehsan, Costa, Hugo, Júlio, Eduardo, Portugal, António, Durães, Luisa

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.87 MB

english, 2014

11

Studies on the formability of powder metallurgical aluminum–copper composite

Wolla, Desalegn Wogaso, Davidson, M.J., Khanra, A.K.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.83 MB

english, 2014

12

Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel

Liu, Xun, Lan, Shuhuai, Ni, Jun

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.28 MB

english, 2014

13

Tensile and compressive deformation behavior of the Al–Si–Cu–Mg cast alloy with additions of Zr, V and Ti

Shaha, S.K., Czerwinski, F., Kasprzak, W., Chen, D.L.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 900 KB

english, 2014

14

Evaluation of fracture toughness and impact toughness of laser rapid manufactured Inconel-625 structures and their co-relation

Puppala, Ganesh, Moitra, Aniruddha, Sathyanarayanan, S., Kaul, Rakesh, Sasikala, G., Prasad, Ram Chandra, Kukreja, Lalit M.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.08 MB

english, 2014

15

Material flow and thermo-mechanical conditions during Friction Stir Welding of polymers: Literature review, experimental results and empirical analysis

Simões, F., Rodrigues, D.M.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1018 KB

english, 2014

16

Influence of date palm fibre and graphite filler on mechanical and wear characteristics of epoxy composites

Shalwan, A., Yousif, B.F.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.20 MB

english, 2014

17

Influence of tool geometries and process variables on friction stir butt welding of Al–4.5%Cu/TiC in situ metal matrix composites

Kumar, Anand, Mahapatra, M.M., Jha, P.K., Mandal, N.R., Devuri, Venkateswarlu

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.17 MB

english, 2014

18

Evolution of microstructure and mechanical properties for 9Cr18 stainless steel during thixoforming

Zhao, Cuiqing, Song, Renbo

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.74 MB

english, 2014

19

Interface microstructure and mechanical properties of arc spot welding Mg–steel dissimilar joint with Cu interlayer

Ren, Daxin, Liu, Liming

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 4.84 MB

english, 2014

20

Mechanical behaviour of dissimilar friction stir welded tailor welded blanks in Al–Mg alloys for Marine applications

Feistauer, E.E., Bergmann, L.A., Barreto, L.S., dos Santos, J.F.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 4.13 MB

english, 2014

21

Wear behavior of nanostructured Al/Al2O3 composite fabricated via accumulative roll bonding (ARB) process

Jamaati, Roohollah, Naseri, Majid, Toroghinejad, Mohammad Reza

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 4.32 MB

english, 2014

22

Hardening and softening mechanisms of pearlitic steel wire under torsion

Zhao, Tian-Zhang, Zhang, Shi-Hong, Zhang, Guang-Liang, Song, Hong-Wu, Cheng, Ming

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 4.07 MB

english, 2014

23

Study of the interaction between microstructure, mechanical and tribo-performance of a commercial brake lining material

Sellami, Amira, Kchaou, Mohamed, Elleuch, Riadh, Cristol, Anne-Lise, Desplanques, Yannick

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 4.98 MB

english, 2014

24

On the conjoint influence of heat treatment and lithium content on microstructure and mechanical properties of A380 aluminum alloy

Karamouz, Mostafa, Azarbarmas, Mortaza, Emamy, Masoud

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.31 MB

english, 2014

25

The effect of strain-rate on the tensile and compressive behavior of graphene reinforced epoxy/nanocomposites

Shadlou, Shahin, Ahmadi-Moghadam, Babak, Taheri, Farid

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.14 MB

english, 2014

26

Behavior of self compacting concrete containing ladle furnace slag and steel fiber reinforcement

Anastasiou, Eleftherios K., Papayianni, Ioanna, Papachristoforou, Michail

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.82 MB

english, 2014

27

Mechanical properties of potentially-smart carbon/epoxy composites with asymmetrically embedded shape memory wires

Sharifishourabi, G., Alebrahim, R., Sharifi, S., Ayob, A., Vrcelj, Z., Yahya, M.Y.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.96 MB

english, 2014

28

Effect of surface modification on laser direct joining of cyclic olefin polymer and stainless steel

Arai, S., Kawahito, Y., Katayama, S.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.60 MB

english, 2014

29

The effect of post-weld heat treatment on the notched tensile fracture of Ti–6Al–4V to Ti–6Al–6V–2Sn dissimilar laser welds

Hsieh, C.T., Chu, C.Y., Shiue, R.K., Tsay, L.W.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.46 MB

english, 2014

30

Role of butter layer in low-cycle fatigue behavior of modified 9Cr and CrMoV dissimilar rotor welded joint

Wu, Qingjun, Lu, Fenggui, Cui, Haichao, Liu, Xia, Wang, Peng, Tang, Xinhua

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 7.11 MB

english, 2014

31

Impact of ruthenium on microstructure and corrosion behavior of β-type Ti–Nb–Ru alloys for biomedical applications

Biesiekierski, Arne, Ping, D.H., Yamabe-Mitarai, Y., Wen, Cuie

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.62 MB

english, 2014

32

Synthesis and properties of electrodeposited Ni–B–CeO2 composite coatings

Shakoor, R.A., Kahraman, Ramazan, Waware, Umesh S., Wang, Yuxin, Gao, Wei

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.57 MB

english, 2014

33

Microstructure and mechanical properties of variable-plane-rolled Mg–3Al–1Zn alloy

Zhu, Rong, Liu, Linli, Wu, Yanjun, Cai, Xiaotian, Shen, Haibin

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.47 MB

english, 2014

34

Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites

Manshor, M.R., Anuar, H., Nur Aimi, M.N., Ahmad Fitrie, M.I., Wan Nazri, W.B., Sapuan, S.M., El-Shekeil, Y.A., Wahit, M.U.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.56 MB

english, 2014

35

Assessment of forming parameters influencing spring-back in multi-point forming process: A comprehensive experimental and numerical study

Davoodi, Behnam, Zareh-Desari, Behrooz

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 4.26 MB

english, 2014

36

Influence of temperature on the pitting corrosion behavior of AISI 316L in chloride–CO2 (sat.) solutions

Ezuber, Hosni M.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 935 KB

english, 2014

37

A study of manufacturing tubes with nano/ultrafine grain structure by stagger spinning

Xia, Qinxiang, Xiao, Gangfeng, Long, Hui, Cheng, Xiuquan, Yang, Baojian

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.88 MB

english, 2014

38

Fatigue behavior and plane-strain fracture toughness of sand-cast Mg–10Gd–3Y–0.5Zr magnesium alloy

Liu, Wencai, Jiang, Longkang, Cao, Liang, Mei, Jun, Wu, Guohua, Zhang, Song, Xiao, Lv, Wang, Shaohua, Ding, Wenjiang

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.60 MB

english, 2014

39

Morphological, thermal and dynamic mechanical properties of Cathay poplar/organoclay composites prepared by in situ process

Wang, Wang, Zhu, Yuan, Cao, Jinzhen

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.38 MB

english, 2014

40

Aluminium based composites strengthened with metallic amorphous phase or ceramic (Al2O3) particles

Kukuła-Kurzyniec, A., Dutkiewicz, J., Góral, A., Coddet, C., Dembinski, L., Perrière, L.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.69 MB

english, 2014

41

Multi-functional honeycomb ceramic materials produced from bauxite residues

Yang, Shaoxin, Zhang, Yihe, Yu, Jiemei, Huang, Taizhong, Tang, Qi, Chu, Paul K., Qi, Lei

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.39 MB

english, 2014

42

Joint properties of friction welded 6061 aluminum alloy/YSZ–alumina composite at low rotational speed

Uday, M.B., Ahmad-Fauzi, M.N.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 6.30 MB

english, 2014

43

Characterisation of aluminium matrix syntactic foams under drop weight impact

Altenaiji, M., Guan, Z.W., Cantwell, W.J., Zhao, Y., Schleyer, G.K.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.80 MB

english, 2014

44

Creep behavior of basalt fiber reinforced polymer tendons for prestressing application

Wang, Xin, Shi, Jianzhe, Liu, Jianxun, Yang, Long, Wu, Zhishen

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.46 MB

english, 2014

45

Investigation of the behaviour of a chopped strand mat/woven roving/foam-Klegecell composite lamination structure during Charpy testing

Arifin, A.M.T., Abdullah, S., Rafiquzzaman, Md., Zulkifli, R., Wahab, D.A., Arifin, A.K.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.67 MB

english, 2014

46

Microstructure characteristic for high temperature deformation of powder metallurgy Ti–47Al–2Cr–0.2Mo alloy

Zhang, Dan-yang, Li, Hui-zhong, Liang, Xiao-peng, Wei, Zhong-wei, Liu, Yong

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.64 MB

english, 2014

47

Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires

Eiras, J.N., Segovia, F., Borrachero, M.V., Monzó, J., Bonilla, M., Payá, J.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.00 MB

english, 2014

48

Constitutive models for high-temperature flow behaviors of a Ni-based superalloy

Lin, Y.C., Wen, Dong-Xu, Deng, Jiao, Liu, Guan, Chen, Jian

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.09 MB

english, 2014

49

Thermo-metallurgical and thermo-mechanical computations for laser welded joint in 9Cr–1Mo(V, Nb) ferritic/martensitic steel

Kumar, Santosh, Awasthi, Reena, Viswanadham, C.S., Bhanumurthy, K., Dey, G.K.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.53 MB

english, 2014

50

High-temperature corrosion behavior of Ni–50Cr coating deposited by high velocity oxygen–fuel technique on low alloy ferritic steel

López, A.J., Proy, M., Utrilla, V., Otero, E., Rams, J.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.41 MB

english, 2014

51

Instability/collapse of polymeric materials and their structures in stimulus-induced shape/surface morphology switching

Huang, Wei Min, Lu, Hai Bao, Zhao, Yong, Ding, Zhen, Wang, Chang Chun, Zhang, Ji Liang, Sun, Li, Fu, Jun, Gao, Xiang Yang

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 5.69 MB

english, 2014

52

Stabilization of retained austenite by the two-step intercritical heat treatment and its effect on the toughness of a low alloyed steel

Xie, Z.J., Yuan, S.F., Zhou, W.H., Yang, J.R., Guo, H., Shang, C.J.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.19 MB

english, 2014

53

Morphology, interfacial and mechanical properties of polylactide/poly(ethylene terephthalate glycol) blends compatibilized by polylactide-g-maleic anhydride

Jiang, Wen-Rou, Bao, Rui-Ying, Yang, Wei, Liu, Zheng-Ying, Xie, Bang-Hu, Yang, Ming-Bo

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.41 MB

english, 2014

54

Antibacterial and mechanical properties of honeycomb ceramic materials incorporated with silver and zinc

Yang, Shaoxin, Zhang, Yihe, Yu, Jiemei, Zhen, Zhichao, Huang, Taizhong, Tang, Qi, Chu, Paul K., Qi, Lei, Lv, Hongbo

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.25 MB

english, 2014

55

Improvement of the mechanical and thermal characteristics of open cell aluminum foams by the electrodeposition of Cu

Antenucci, A., Guarino, S., Tagliaferri, V., Ucciardello, N.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.50 MB

english, 2014

56

Local mechanical properties of intercritically reheated coarse grained heat affected zone in low alloy steel

Haugen, Veronica G., Rogne, Bjørn Rune Sørås, Akselsen, Odd M., Thaulow, Christian, Østby, Erling

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.26 MB

english, 2014

57

Effect of a novel coupling agent, alkyl ketene dimer, on the mechanical properties of wood–plastic composites

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.06 MB

english, 2014

58

Metallic glass–steel composite with improved compressive plasticity

Shakur Shahabi, H., Scudino, S., Kühn, U., Eckert, J.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.13 MB

english, 2014

59

A comprehensive investigation into the effect of aging and coarse aggregate size and volume on mechanical properties of self-compacting concrete

Nikbin, I.M., Beygi, M.H.A., Kazemi, M.T., Vaseghi Amiri, J., Rahmani, E., Rabbanifar, S., Eslami, M.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 3.02 MB

english, 2014

60

Microstructural and tribological characterization of air plasma sprayed nanostructured alumina–titania coatings deposited with nitrogen and argon as primary plasma gases

Bolleddu, V., Racherla, V., Bandyopadhyay, P.P.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 6.32 MB

english, 2014

61

Hot tensile deformation behaviors and constitutive model of an Al–Zn–Mg–Cu alloy

Zhou, Mi, Lin, Y.C., Deng, Jiao, Jiang, Yu-Qiang

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.69 MB

english, 2014

62

Investigation on in situ Al0.5FeSi0.5/Al composites prepared by transient liquid phase sintering

Zhao, L.Z., Jiao, Y., Zhao, M.J., Zhang, J.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 2.50 MB

english, 2014

63

Inside Front Cover (Editorial Board)

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 30 KB

english, 2014

64

Studies on mechanical, thermal and dynamic mechanical properties of untreated (raw) and treated coconut sheath fiber reinforced epoxy composites

Suresh Kumar, S.M., Duraibabu, D., Subramanian, K.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.69 MB

english, 2014

65

Potentiality of utilising natural textile materials for engineering composites applications

Misnon, Mohd Iqbal, Islam, Md Mainul, Epaarachchi, Jayantha Ananda, Lau, Kin-tak

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.63 MB

english, 2014

66

Heating/cooling channels design for an automotive interior part and its evaluation in rapid heat cycle molding

Wang, Gui-long, Zhao, Guo-qun, Wang, Xiao-xin

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 4.78 MB

english, 2014

67

Comparative study on microstructures and mechanical properties of the heat-treated Al–5.0Cu–0.6Mn–xFe alloys prepared by gravity die casting and squeeze casting

Lin, Bo, Zhang, WeiWen, Lou, ZhaoHui, Zhang, DaTong, Li, YuanYuan

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 7.15 MB

english, 2014

68

Investigation of corrosion and mechanical properties of Al–Cu–SiC–xNi composite alloys

Karakulak, E., Yamanoğlu, R., Erten, U., Zeren, A., Zor, S., Zeren, M.

Journal:

Materials & Design

Year:

2014

Language:

english

File:

PDF, 1.24 MB

english, 2014