Volume 66

Materials & Design

Volume 66

1

Microstructure evolution and strain hardening behavior during plastic deformation of directionally solidified twinning-induced plasticity steel

Wang, Dan, Wang, Kun, Luo, Min, Yang, Jianzhong, Han, Fusheng

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.23 MB

english, 2015

2

Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti–5Al–5V–5Mo–3Cr

Shekhar, Shashi, Sarkar, Rajdeep, Kar, Sujoy Kumar, Bhattacharjee, Amit

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.89 MB

english, 2015

3

Damage prediction for un-coated and coated aluminum alloys under thermal and mechanical fatigue loadings based on a modified plastic strain energy approach

Azadi, Mohammad, Farrahi, Gholam Hossein, Winter, Gerhard, Huter, Patrik, Eichlseder, Wilfred

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.02 MB

english, 2015

4

Manufacturing and bending behaviour of in situ foam-filled aluminium alloy tubes

Duarte, Isabel, Vesenjak, Matej, Krstulović-Opara, Lovre, Anžel, Ivan, Ferreira, José M.F.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.22 MB

english, 2015

5

Forming of high strength titanium sheet at room temperature

Badr, Ossama Mamdouh, Rolfe, Bernard, Hodgson, Peter, Weiss, Matthias

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.87 MB

english, 2015

6

Critically designing today’s melt processed bulk magnesium alloys using boron rich nanoparticles

Paramsothy, Muralidharan, Gupta, Manoj

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.41 MB

english, 2015

7

Time dependent springback of a magnesium alloy

Li, B., McClelland, Z., Horstemeyer, S.J., Aslam, I., Wang, P.T., Horstemeyer, M.F.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.43 MB

english, 2015

8

Influence of Cu on microstructure and tensile properties of 7XXX series aluminum alloy

Liao, Yu-guo, Han, Xiao-qi, Zeng, Miao-xia, Jin, Man

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.65 MB

english, 2015

9

Dynamic properties of alumina hollow particle filled aluminum alloy A356 matrix syntactic foams

Licitra, Luca, Luong, Dung D., Strbik, Oliver M., Gupta, Nikhil

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.09 MB

english, 2015

10

Interfacial fracture of the fibre-metal laminates based on fibre reinforced thermoplastics

Abdullah, M.R., Prawoto, Y., Cantwell, W.J.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.76 MB

english, 2015

11

A candidate of mechanical energy mitigation system: Dynamic and quasi-static behaviors and mechanisms of zeolite β/water system

Sun, Yueting, Guo, Ziyan, Xu, Jun, Xu, Xiaoqing, Liu, Cheng, Li, Yibing

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.36 MB

english, 2015

12

Effects of homogenization treatment on the microstructure and mechanical properties of Mg–8Li–3Al–Y alloy

Peng, Q.Z., Zhou, H.T., Zhong, F.H., Ding, H.B., Zhou, X., Liu, R.R., Xie, T., Peng, Y.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.77 MB

english, 2015

13

Effect of the heating rate on the microstructure of in situ Al2O3 particle-reinforced Al matrix composites prepared via displacement reactions in an Al/CuO system

Zhao, Ge, Shi, Zhiming, Ta, Na, Ji, Guojun, Zhang, Ruiying

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.12 MB

english, 2015

14

Thermo-mechanical performance of poly(lactic acid)/flax fibre-reinforced biocomposites

Nassiopoulos, Elias, Njuguna, James

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.61 MB

english, 2015

15

Properties and failure behavior of hybrid wire mesh/carbon fiber reinforced thermoplastic composites under quasi-static tensile load

Hasselbruch, H., von Hehl, A., Zoch, H.-W.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.79 MB

english, 2015

16

Effect of joining parameters on microstructure of dissimilar metal joints between aluminum and galvanized steel

Shao, L., Shi, Y., Huang, J.K., Wu, S.J.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 954 KB

english, 2015

17

Rapid intermetallic growth under high strain rate deformation during high power ultrasonic spot welding of aluminium to steel

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.78 MB

english, 2015

18

Designing laminated metal composites for tensile ductility

Cohades, Amaël, Çetin, Arda, Mortensen, Andreas

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.76 MB

english, 2015

19

Designing for damage tolerance in aerospace: A hybrid material technology

Alderliesten, R.C.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.68 MB

english, 2015

20

Mechanically alloyed Al7075–TiC nanocomposite: Powder processing, consolidation and mechanical strength

Azimi, Amin, Shokuhfar, Ali, Nejadseyfi, Omid

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 632 KB

english, 2015

21

Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation

Alavudeen, A., Rajini, N., Karthikeyan, S., Thiruchitrambalam, M., Venkateshwaren, N.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.97 MB

english, 2015

22

Strengthening and toughening strategies for tin bronze alloy through fabricating in-situ nanostructured grains

Chen, Xiaohua, Wang, Zidong, Ding, Ding, Tang, Hao, Qiu, Lili, Luo, Xiang, Shi, Guodong

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.38 MB

english, 2015

23

Corrosion behavior of friction stir welded lean duplex stainless steel

Sarlak, H., Atapour, M., Esmailzadeh, M.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.39 MB

english, 2015

24

Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites

Karbalaei Akbari, M., Baharvandi, H.R., Shirvanimoghaddam, K.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.30 MB

english, 2015

25

Heat resistance, crystallization behavior, and mechanical properties of polylactide/nucleating agent composites

Wang, Lei, Wang, Ya-nan, Huang, Zhi-gang, Weng, Yun-xuan

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.25 MB

english, 2015

26

Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750

Devendranath Ramkumar, K., Mishra, Debidutta, Ganesh Raj, B., Vignesh, M.K., Thiruvengatam, G., Sudharshan, S.P., Arivazhagan, N., Sivashanmugam, N., Rabel, Arul Maximus

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 6.78 MB

english, 2015

27

Synergy effect of reinforcement particle, fiber and matrix on wear resistance of hybrid metal matrix composite fabricated by low pressure infiltration process

Wang, T., Shozaki, M., Yamamoto, M., Kagawa, A.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.06 MB

english, 2015

28

Study of effect of fibre volume and dimension on mechanical, thermal, and water absorption behaviour of luffa reinforced epoxy composites

Anbukarasi, K., Kalaiselvam, S.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.11 MB

english, 2015

29

Effect of functionalization of graphene nanoplatelets on the mechanical response of graphene/epoxy composites

Ahmadi-Moghadam, B., Sharafimasooleh, M., Shadlou, S., Taheri, F.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.12 MB

english, 2015

30

The microstructure and mechanical properties of micro-scale Y2O3 strengthened 9Cr steel fabricated by vacuum casting

Shi, Zimu, Han, Fusheng

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.86 MB

english, 2015

31

Development of novel green and biocomposite materials: Tensile and flexural properties and damage analysis using acoustic emission

Bravo, Alencar, Toubal, Lotfi, Koffi, Demagna, Erchiqui, Fouad

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.02 MB

english, 2015

32

Mechanical and impact performance of three-phase polyamide 6 nanocomposites

Gendre, Laura, Njuguna, James, Abhyankar, Hrushikesh, Ermini, Valentina

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.38 MB

english, 2015

33

Analyses of woven hemp fabric characteristics for composite reinforcement

Misnon, M.I., Islam, M.M., Epaarachchi, J.A., Lau, K.T.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.20 MB

english, 2015

34

On the particle size effect in expanded perlite aluminium syntactic foam

Taherishargh, M., Sulong, M.A., Belova, I.V., Murch, G.E., Fiedler, T.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.02 MB

english, 2015

35

Feasibility of preparing of silicon nitride ceramics components by aqueous tape casting in combination with laminated object manufacturing

Liu, Shichao, Ye, Feng, Liu, Limeng, Liu, Qiang

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.33 MB

english, 2015

36

Laboratory evaluation on performance of diatomite and glass fiber compound modified asphalt mixture

Guo, Qinglin, Li, Lili, Cheng, Yongchun, Jiao, Yubo, Xu, Chun

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.49 MB

english, 2015

37

A study on the microstructures and mechanical properties of forged trace-boron-modified Ti–B20 alloy

Huang, Liguo, Chen, Yuyong

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.11 MB

english, 2015

38

Prediction of the bond–slip law in externally laminated concrete substrates by an analytical based nonlinear approach

Hadigheh, S.A., Gravina, R.J., Setunge, S.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.11 MB

english, 2015

39

Quasi-static and high strain rates compressive response of iron and Invar matrix syntactic foams

Luong, Dung D., Shunmugasamy, Vasanth Chakravarthy, Gupta, Nikhil, Lehmhus, Dirk, Weise, Jörg, Baumeister, Joachim

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 7.24 MB

english, 2015

40

Out of plane crushing and local stiffness determination of proposed foam filled sandwich panel for Korean Tilting Train eXpress – Numerical study

Mozafari, Hozhabr, Khatami, Soroush, Molatefi, Habibollah

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 8.04 MB

english, 2015

41

Low cycle fatigue of SiCp reinforced AA2009 composites

Luk, M.J., Mirza, F.A., Chen, D.L., Ni, D.R., Xiao, B.L., Ma, Z.Y.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.34 MB

english, 2015

42

Fatigue life modeling of a single crystal superalloy and its thin plate with a hole at elevated temperature

Dong, Chengli, Yu, Huichen, Li, Ying

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.80 MB

english, 2015

43

A phenomenological fatigue life prediction model of glass fiber reinforced polymer composites

Zhang, Wenjiao, Zhou, Zhengong, Zhang, Boming, Zhao, Shuyuan

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 606 KB

english, 2015

44

Friction spot joining of aluminum AA6181-T4 and carbon fiber-reinforced poly(phenylene sulfide): Effects of process parameters on the microstructure and mechanical strength

Esteves, J.V., Goushegir, S.M., dos Santos, J.F., Canto, L.B., Hage, E., Amancio-Filho, S.T.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.61 MB

english, 2015

45

Pre-review study of the aluminum/alumina master alloy made through pressure infiltration

Nagy, Š., Nosko, M., Orovčík, Ľ., Iždinský, K., Kúdela, S., Krížik, P.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.42 MB

english, 2015

46

Taking a downward turn on the weight spiral – Lightweight materials in transport applications

Lehmhus, Dirk, von Hehl, Axel, Kayvantash, Kambiz, Gradinger, Rudolf, Becker, Thomas, Schimanski, Kai, Avalle, Massimiliano

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.04 MB

english, 2015

47

Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure

Sugavaneswaran, M., Arumaikkannu, G.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.42 MB

english, 2015

48

Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process

Chen, Liang, Zhao, Guoqun, Yu, Junquan, Zhang, Wendong

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.48 MB

english, 2015

49

Effect of vanadium on the high-cycle fatigue fracture properties of medium-carbon microalloyed steel for fracture splitting connecting rod

Hui, Weijun, Chen, Silian, Zhang, Yongjian, Shao, Chengwei, Dong, Han

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.30 MB

english, 2015

50

Flow and fracture behavior of high-strength armor steel PROTAC 500

Trajkovski, Jovan, Kunc, Robert, Pepel, Vili, Prebil, Ivan

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.62 MB

english, 2015

51

A lightweight, high compression strength ultra high temperature ceramic corrugated panel with potential for thermal protection system applications

Wei, Kai, He, Rujie, Cheng, Xiangmeng, Zhang, Rubing, Pei, Yongmao, Fang, Daining

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.08 MB

english, 2015

52

Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al–Mg–Cr–Mn (AA 5052-O) alloy

Moshwan, Raza, Yusof, Farazila, Hassan, M.A., Rahmat, S.M.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.41 MB

english, 2015

53

Effect of pulse current on mechanical properties and dendritic morphology of modified medium manganese steel welds metal

Di, Xinjie, Deng, Shengjie, Wang, Baosen

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.76 MB

english, 2015

54

Viscoelastic characterization and self-heating behavior of laminated fiber composite driveshafts

Henry, Todd C., Bakis, Charles E., Smith, Edward C.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 711 KB

english, 2015

55

Grain refinement of Al–Si alloys by Nb–B inoculation. Part II: Application to commercial alloys

Bolzoni, L., Nowak, M., Hari Babu, N.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.27 MB

english, 2015

56

Mechanical and dry-sliding tribological properties of Fe3Al based composites reinforced by novel W0.5Al0.5C0.5 particulates

Cheng, Jun, Yin, Bing, Qiao, Zhuhui, Yang, Jun, Liu, Weimin

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 8.84 MB

english, 2015

57

Study on hot deformation behaviour and processing maps of low carbon bainitic steel

Yang, Zhinan, Zhang, Fucheng, Zheng, Chunlei, Zhang, Ming, Lv, Bo, Qu, Lin

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.07 MB

english, 2015

58

Effect of nano-fillers on the thermal conductivity of epoxy composites with micro-Al2O3 particles

Gao, Zhifang, Zhao, Lei

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.31 MB

english, 2015

59

Experimental investigation on fatigue crack behavior of bridge steel Q345qD base metal and butt weld

Zong, Liang, Shi, Gang, Wang, Yuanqing

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.98 MB

english, 2015

60

Effect of process parameters on mechanical properties of friction stir spot welded magnesium to aluminum alloys

Rao, H.M., Yuan, W., Badarinarayan, H.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 6.57 MB

english, 2015

61

The effects of Nb content on microstructure and fracture behavior of near α titanium alloys

Fu, Binguo, Wang, Hongwei, Zou, Chunming, Wei, Zunjie

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.38 MB

english, 2015

62

Microstructure and tensile properties of as-extruded Mg–Li–Zn–Gd alloys reinforced with icosahedral quasicrystal phase

Zhang, Yang, Zhang, Jie, Wu, Guohua, Liu, Wencai, Zhang, Liang, Ding, Wenjiang

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.57 MB

english, 2015

63

Characterising mode I/mode II fatigue delamination growth in unidirectional fibre reinforced polymer laminates

Al-Khudairi, O., Hadavinia, H., Waggott, A., Lewis, E., Little, C.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.14 MB

english, 2015

64

Effects of sea water environment on glass fiber reinforced plastic materials used for marine civil engineering constructions

Garcia-Espinel, J.D., Castro-Fresno, D., Parbole Gayo, P., Ballester-Muñoz, F.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 795 KB

english, 2015

65

Characterization and modeling of the strain rate sensitivity of polyetheretherketone’s compressive yield stress

El-Qoubaa, Zakaria, Othman, Ramzi

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.59 MB

english, 2015

66

Experimental study and numerical simulation of dynamic recrystallization behavior of a micro-alloyed plastic mold steel

Li, Xiaocheng, Duan, Lili, Li, Junwan, Wu, Xiaochun

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.71 MB

english, 2015

67

Grain refinement of Al–Si alloys by Nb–B inoculation. Part I: Concept development and effect on binary alloys

Nowak, M., Bolzoni, L., Hari Babu, N.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 5.63 MB

english, 2015

68

Modelling the influence of the process inputs on the removal of surface contaminants from Ti–6Al–4V linear friction welds

McAndrew, Anthony R., Colegrove, Paul A., Addison, Adrian C., Flipo, Bertrand C.D., Russell, Michael J.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.35 MB

english, 2015

69

Inside Front Cover (Editorial Board)

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 30 KB

english, 2015

70

Inside Front Cover (Editorial Board)

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 30 KB

english, 2015