Volume 85

Materials & Design

Volume 85

1

High strain-rate superplasticity of fine- and ultrafine-grained AA5083 aluminum alloy at intermediate temperatures

Fakhar, N., Fereshteh-Saniee, F., Mahmudi, R.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 700 KB

english, 2015

2

Effect of local strains on the texture and mechanical properties of AZ31 magnesium alloy produced by continuous variable cross-section direct extrusion (CVCDE)

Li, F., Zeng, X., Chen, Q., Cao, G.J.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.75 MB

english, 2015

3

Strengthening masonry vaults with organic and inorganic composites: An experimental approach

Garmendia, Leire, Larrinaga, Pello, San-Mateos, Rosa, San-José, José T.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.52 MB

english, 2015

4

The phase stability of Ni2CrFeMox multi-principal-component alloys with medium configurational entropy

He, Feng, Wang, Zhijun, Zhu, Man, Li, Junjie, Dang, Yingying, Wang, Jincheng

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.70 MB

english, 2015

5

Electrically conductive carbon nanotube/polypropylene nanocomposite with improved mechanical properties

Al-Saleh, Mohammed H.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.47 MB

english, 2015

6

Three kinds of charcoal powder reinforced ultra-high molecular weight polyethylene composites with excellent mechanical and electrical properties

Li, Suiyi, Li, Xiaoyan, Deng, Qiaoyun, Li, Dagang

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.99 MB

english, 2015

7

Keyhole gas tungsten arc welding of AISI 316L stainless steel

Feng, Yueqiao, Luo, Zhen, Liu, Zuming, Li, Yang, Luo, Yucan, Huang, Yongxian

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.50 MB

english, 2015

8

Ratcheting assessment of steel samples under various non-proportional loading paths by means of kinematic hardening rules

Hamidinejad, S.M., Varvani-Farahani, A.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.68 MB

english, 2015

9

Tailoring a gradient nanostructured age-hardened aluminum alloy using high-gradient strain and strain rate

Xu, Pingwei, Luo, Hongyun, Han, Zhiyuan, Zou, Jian

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.83 MB

english, 2015

10

Fabrication, superhydrophobicity, and microwave absorbing properties of the magnetic γ-Fe2O3/bamboo composites

Jin, Chunde, Yao, Qiufang, Li, Jingpeng, Fan, Bitao, Sun, Qingfeng

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.76 MB

english, 2015

11

Fabrication and wear characterization of an A413/Ni surface metal matrix composite fabricated via friction stir processing

Golmohammadi, M., Atapour, M., Ashrafi, A.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.88 MB

english, 2015

12

Production and characterization of lightweight vermiculite/geopolymer-based panels

Medri, V., Papa, E., Mazzocchi, M., Laghi, L., Morganti, M., Francisconi, J., Landi, E.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.13 MB

english, 2015

13

Torsional and compressive behaviours of a hybrid material: Spiral fibre reinforced metal matrix composite

Khoddam, S., Estrin, Y., Kim, H.S., Bouaziz, O.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.28 MB

english, 2015

14

Significant acceleration of nitriding kinetics in pure iron by pressurized gas treatment

Wang, Bo, Fu, Wantang, Dong, Fan, Jin, Guofeng, Feng, Weiwei, Wang, Zhenhua, Sun, Shuhua

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.91 MB

english, 2015

15

Microstructure and fatigue crack growth behavior in tungsten inert gas welded DP780 dual-phase steel

Li, Shengci, Kang, Yonglin, Zhu, Guoming, Kuang, Shuang

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.60 MB

english, 2015

16

Influence of short time milling in R5(Si,Ge)4, R=Gd and Tb, magnetocaloric materials

Pires, A.L., Belo, J.H., Turcaud, J., Oliveira, G.N.P., Araújo, J.P., Berenov, A., Cohen, L.F., Lopes, A.M.L., Pereira, A.M.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.53 MB

english, 2015

17

Microstructure and corrosion behavior of Ti nanoparticles reinforced Ni–Ti composite coatings by electrodeposition

Zhao, Yuantao, Jiang, Chuanhai, Xu, Zhou, Cai, Fei, Zhang, Zhongquan, Fu, Peng

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.56 MB

english, 2015

18

Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn–3Mg alloy as potential biodegradable implant material

Dambatta, M.S., Izman, S., Kurniawan, D., Farahany, Saeed, Yahaya, Bashir, Hermawan, H.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.77 MB

english, 2015

19

Pathway into the silicon nucleation on silicene substrate at nanoscale

Liu, Sida, Li, Hui, He, Yezeng, Li, Xiongying, Li, Yunfang, Wang, Xin

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.47 MB

english, 2015

20

Effect of carbonization temperature on properties of aligned electrospun polyacrylonitrile carbon nanofibers

Liu, Cheng-Kun, Feng, Yan, He, Hai-Jun, Zhang, Jing, Sun, Run-Jun, Chen, Mei-Yu

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 749 KB

english, 2015

21

Optimised design of electrode morphology for novel dissimilar resistance spot welding of aluminium alloy and galvanised high strength steel

Zhang, Weihua, Sun, Daqian, Han, Lijun, Li, Yongqiang

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 5.01 MB

english, 2015

22

Fatigue and corrosion-fatigue strength of hot rolled Ti35Nb2.5Sn alloy

Azevedo, Thiago Figueiredo, de Andrade, Carlos Eduardo Celestino, Santos, Silvando Vieira dos, Silva, Abraão Santos, Griza, Sandro

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.02 MB

english, 2015

23

Aluminum–ceramic cenospheres syntactic foams produced by powder metallurgy route

Vogiatzis, C.A., Tsouknidas, A., Kountouras, D.T., Skolianos, S.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.68 MB

english, 2015

24

Alkali-activated cements and mortars based on blast furnace slag and red clay brick waste

Rakhimova, Nailia R., Rakhimov, Ravil Z.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 774 KB

english, 2015

25

Microstructure and mechanical behavior in dissimilar 13Cr/2205 stainless steel welded pipes

Bettahar, K., Bouabdallah, M., Badji, R., Gaceb, M., Kahloun, C., Bacroix, B.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.73 MB

english, 2015

26

Design of a novel dielectric resonator antenna using MgTiO3–CoTiO3 for wideband applications

Ullah, Ubaid, Ali, Wan Fahmin Faiz Wan, Ain, Mohd Fadzil, Mahyuddin, Nor Muzlifah, Ahmad, Zainal Arifin

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.92 MB

english, 2015

27

Nb-doped TiO2 thin films for photovoltaic applications

Potlog, T., Dumitriu, P., Dobromir, M., Manole, A., Luca, D.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.66 MB

english, 2015

28

Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying

Luo, Xiao-Tao, Wei, Ying-Kang, Wang, Yan, Li, Chang-Jiu

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.11 MB

english, 2015

29

The fabrication of porous corundum spheres with core-shell structure for corundum-spinel castables

Chen, Huan, Zhao, Lei, He, Xuan, Fang, Wei, Lei, Zhong-xing, Chen, Hui

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.49 MB

english, 2015

30

Characterization of spatter in underwater wet welding by X-ray transmission method

Guo, Ning, Xu, Changsheng, Guo, Wei, Du, Yongpeng, Feng, Jicai

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.36 MB

english, 2015

31

Design of truss-like cellular structures using relative density mapping method

Alzahrani, Mahmoud, Choi, Seung-Kyum, Rosen, David W.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.74 MB

english, 2015

32

Evolution of structure and fabrication of Cu/Fe multilayered composites by a repeated diffusion-rolling procedure

Yang, Yihang, Wang, Dezhi, Lin, Jia, Khan, Dil Faraz, Lin, Gaoyong, Ma, Jidong

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 968 KB

english, 2015

33

Investigation of structural, optical and micro-mechanical properties of (NdyTi1−y)Ox thin films deposited by magnetron sputtering

Mazur, Michal, Howind, Torsten, Gibson, Des, Kaczmarek, Danuta, Song, Shigeng, Wojcieszak, Damian, Zhu, Wenzhong, Mazur, Piotr, Domaradzki, Jaroslaw, Placido, Frank

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.51 MB

english, 2015

34

Microstructure evolution in a single crystal nickel-based superalloy joint by linear friction welding

Ma, Tiejun, Yan, Ming, Yang, Xiawei, Li, Wenya, Chao, Y.J.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.80 MB

english, 2015

35

Measurement and calculation of plasma drag force in arc welding based on high-speed photography technology and particle dynamics

Li, Ke, Wu, Zhisheng, Liu, Cuirong

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.12 MB

english, 2015

36

Influence of cold rolling on the precipitation in an Al–Mn–Zr alloy

Karlík, M., Vronka, M., Haušild, P., Hájek, M.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.93 MB

english, 2015

37

Microstructure and mechanical properties of LA51 and LA51–0.5Y alloys with different accumulated strains and rolling temperatures

Wang, Tianzi, Zhu, Tianlong, Wu, Ruizhi, Miao, Wei, Zhang, Jinghuai, Zhang, Milin

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.10 MB

english, 2015

38

Effect of stacking fault energy on work hardening behaviors in Fe–Mn–Si–C high manganese steels by varying silicon and carbon contents

Xiong, Renlong, Peng, Huabei, Wang, Shanling, Si, Haitao, Wen, Yuhua

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.74 MB

english, 2015

39

Influence of injection molding on the flexural strength and surface quality of long glass fiber-reinforced polyamide 6.6 composites

Teixeira, D., Giovanela, M., Gonella, L.B., Crespo, J.S.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.41 MB

english, 2015

40

Rapid parametric analysis of SEN(T) specimens using algorithmic modelling: Evaluation of strain energy density and notch stress intensity factors

Larrosa, N.O., Treifi, M., Ainsworth, R.A.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.36 MB

english, 2015

41

Superelastic anisotropy characteristics of columnar-grained Cu–Al–Mn shape memory alloys and its potential applications

Liu, Ji-Li, Huang, Hai-You, Xie, Jian-Xin

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.09 MB

english, 2015

42

Effect of crumb rubber gradation on a rubberized cold recycled mixture for road pavements

Pettinari, Matteo, Simone, Andrea

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.56 MB

english, 2015

43

Sub-surface stress measurement of cross welds in a dissimilar welded pressure vessel

Javadi, Yashar, Ashoori, Masoud

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.33 MB

english, 2015

44

A novel in-situ polymer derived nano ceramic MMC by friction stir processing

P., Ajay Kumar, Raj, Rishi, Kailas, Satish V.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.40 MB

english, 2015

45

Preparation and characterization of a novel microcapsule-type latent curing agent for epoxy resin

Xing, Suli, Yang, Jinshui, Huang, Yalin, Zheng, Qing, Zeng, Jingcheng

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.82 MB

english, 2015

46

Forming limit diagram of Advanced High Strength Steels (AHSS) based on strain-path diagram

Bhargava, Marrapu, Tewari, Asim, Mishra, Sushil K.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.12 MB

english, 2015

47

Influences of weaving architectures on the impact resistance of multi-layer fabrics

Yang, Cheng-Chou, Ngo, Tuan, Tran, Phuong

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.53 MB

english, 2015

48

The effect of grafting a nano-TiO2 thin film on physical and mechanical properties of cellulosic natural fibers

Foruzanmehr, MReza, Vuillaume, Pascal Y., Robert, Mathieu, Elkoun, Saïd

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.72 MB

english, 2015

49

Primary investigation on sound absorption performance of highly porous titanium foams

Liu, P.S., Qing, H.B., Hou, H.L.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.66 MB

english, 2015

50

Inclusion of a thermoplastic phase to improve impact and post-impact performances of carbon fibre reinforced thermosetting composites — A review

Nash, N.H., Young, T.M., McGrail, P.T., Stanley, W.F.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.81 MB

english, 2015

51

Valorization of co-combustion fly ash in concrete production

Faleschini, Flora, Zanini, Mariano Angelo, Brunelli, Katya, Pellegrino, Carlo

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.97 MB

english, 2015

52

Optimum parameters and kinetic analysis for hot working of a homogenized Mg–8Sn–1Al–1Zn alloy

Cheng, Weili, Tian, Quanwei, Yu, Hui, You, Bong Sun, Wang, Hongxia

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.50 MB

english, 2015

53

Review of the biocompatibility of micro-arc oxidation coated titanium alloys

Wang, Yi, Yu, Huijun, Chen, Chuanzhong, Zhao, Zhihuan

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.02 MB

english, 2015

54

Cork waste in cement based materials

Matos, Ana Mafalda, Nunes, Sandra, Sousa-Coutinho, Joana

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.92 MB

english, 2015

55

Joint properties of friction welded joint between pure magnesium and pure aluminium with post-weld heat treatment

Kimura, M., Fuji, A., Shibata, S.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.75 MB

english, 2015

56

Development of high-strength, low-cost wrought Mg–2.5mass% Zn alloy through micro-alloying with Ca and La

Du, Y.Z., Qiao, X.G., Zheng, M.Y., Wu, K., Xu, S.W.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.60 MB

english, 2015

57

Microstructure and properties of the Si3N4/silica aerogel composites fabricated by the sol–gel method via ambient pressure drying

Yang, Haixia, Ye, Feng, Liu, Qiang, Gao, Ye

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.37 MB

english, 2015

58

Quaternary Ti–Zr–Be–Ni bulk metallic glasses with large glass-forming ability

Zhao, S.F., Gong, P., Li, J.F., Chen, N., Yao, K.F.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.17 MB

english, 2015

59

Al/stainless-invar composites with tailored anisotropy for thermal management in light weight electronic packaging

Ryelandt, Sophie, Mertens, Anne, Delannay, Francis

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.18 MB

english, 2015

60

Continuous C fibre composites with a porous ZrB2 Matrix

Sciti, D., Natali Murri, A., Medri, V., Zoli, L.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.73 MB

english, 2015

61

Effect of WC particle size and Ag volume fraction on electrical contact resistance and thermal conductivity of Ag–WC contact materials

Ray, Nachiketa, Kempf, Bernd, Mützel, Timo, Froyen, Ludo, Vanmeensel, Kim, Vleugels, Jef

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 5.10 MB

english, 2015

62

Laser cladding as repair technology for Ti–6Al–4V alloy: Influence of building strategy on microstructure and hardness

Paydas, H., Mertens, A., Carrus, R., Lecomte-Beckers, J., Tchoufang Tchuindjang, J.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 5.58 MB

english, 2015

63

Surface structural changes, surface energy and antiwear properties of polytetrafluoroethylene induced by proton irradiation

Lv, Mei, Zheng, Fei, Wang, Qihua, Wang, Tingmei, Liang, Yongmin

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.45 MB

english, 2015

64

Comparison of carbon nanofiller-based polymer composite adhesives and pastes for thermal interface applications

Raza, Mohsin Ali, Westwood, Aidan, Stirling, Chris

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.94 MB

english, 2015

65

Effect of fiber surface modification on the lifetime of glass fiber reinforced polymerized cyclic butylene terephthalate composites in hygrothermal conditions

Yang, Bin, Zhang, Jifeng, Zhou, Limin, Wang, Zhenqing, Liang, Wenyan

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.63 MB

english, 2015

66

Effects of heat treatments on microstructure and tensile properties of as-extruded TiBw/near-α Ti composites

Wang, B., Huang, L.J., Geng, L., Rong, X.D., Liu, B.X.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.97 MB

english, 2015

67

Insight of the interface of electroless Ni–P/SiC composite coating on aluminium alloy, LM24

Franco, M., Sha, W., Tan, V., Malinov, S.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.32 MB

english, 2015

68

Arc erosion behavior of Ag/Ni electrical contact materials

Wu, Chunping, Yi, Danqing, Weng, Wei, Li, Suhua, Zhou, Jiemin, Zheng, Feng

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 7.24 MB

english, 2015

69

Investigation of mechanical and corrosion properties of an Al–Zn–Mg–Cu alloy under various ageing conditions and interface analysis of η′ precipitate

Yang, Wenchao, Ji, Shouxun, Zhang, Qian, Wang, Mingpu

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.60 MB

english, 2015

70

The effect of aging process on the microstructure and mechanical properties of a Cu–Be–Co–Ni alloy

Tang, Yanchuan, Kang, Yonglin, Yue, Lijuan, Jiao, Xiaoliang

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 5.19 MB

english, 2015

71

Room-temperature creep behavior on crack tip of commercially pure titanium

Dai, Qiao, Zhou, Chang-Yu, Peng, Jian, He, Xiao-Hua

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.01 MB

english, 2015

72

Biomedical TiNbZrTaSi alloys designed by d-electron alloy design theory

Li, Y.H., Yang, C., Wang, F., Zhao, H.D., Qu, S.G., Li, X.Q., Zhang, W.W., Li, Y.Y.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.33 MB

english, 2015

73

Nanostructured copper and copper oxide thin films fabricated by hydrothermal treatment of copper hydroxide nitrate

Ghotbi, Mohammad Yeganeh, Rahmati, Zahra

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.44 MB

english, 2015

74

The bimodal effect of La on the microstructures and mechanical properties of in-situ A356–TiB2 composites

Wang, Tongmin, Zhao, Yufei, Chen, Zongning, Zheng, Yuanping, Kang, Huijun

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.17 MB

english, 2015

75

Behavior and modeling of flow softening and ductile damage evolution in hot forming of TA15 alloy sheets

Yang, Lei, Wang, Baoyu, Liu, Gang, Zhao, Huijun, Xiao, Wenchao

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 5.18 MB

english, 2015

76

Size effects on tensile strength of aluminum–bronze alloy at room temperature

Chen, F., Chen, S., Dong, X.H., Li, C.Y., Hong, X.T., Zhang, X.P.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.04 MB

english, 2015

77

Improving the electromechanical performance of dielectric elastomers using silicone rubber and dopamine coated barium titanate

Jiang, Liang, Betts, Anthony, Kennedy, David, Jerrams, Stephen

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.59 MB

english, 2015

78

Design of submicron structures with superhydrophobic and oleophobic properties on zinc substrate

Hao, Li, Yu, Sirong, Han, Xiangxiang, Zhang, Shanbao

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.74 MB

english, 2015

79

Effect of humidity on porosity, microstructure, and fatigue strength of A7N01S-T5 aluminum alloy welded joints in high-speed trains

Gou, G., Zhang, M., Chen, H., Chen, J., Li, P., Yang, Y.P.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.08 MB

english, 2015

80

Low-cycle fatigue behavior and microstructural evolution in a low-carbon carbide-free bainitic steel

Zhou, Qian, Qian, Lihe, Meng, Jiangying, Zhao, Leijie, Zhang, Fucheng

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.34 MB

english, 2015

81

Controlled grafting superhydrophobic cellulose surface with environmentally-friendly short fluoroalkyl chains by ATRP

Li, S.H., Huang, J.Y., Ge, M.Z., Li, S.W., Xing, T.L., Chen, G.Q., Liu, Y.Q., Zhang, K.Q., Al-Deyab, S.S., Lai, Y.K.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.60 MB

english, 2015

82

Flame retardance and thermal stability of wool fabric treated by boron containing silica sols

Zhang, Qianghua, Zhang, Wei, Huang, Jianying, Lai, Yuekun, Xing, Tingling, Chen, Guoqiang, Jin, Weirong, Liu, Hongzhao, Sun, Bin

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 753 KB

english, 2015

83

Achieving the best glass former in a binary Gd–Co alloy system

Ma, Y.F., Yu, P., Xia, L.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.10 MB

english, 2015

84

Investigation of La3+ Doped Yb2Sn2O7 as new thermal barrier materials

Wang, Jing, Xu, Fang, Wheatley, Richard J., Choy, Kwang-Leong, Neate, Nigel, Hou, Xianghui

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.58 MB

english, 2015

85

Lepidocrocite-like ferrititanate nanosheets and their full exfoliation with quaternary ammonium compounds

Marinkovic, Bojan A., Pontón, Patricia I., Resende, Juliana M., Letichevsky, Sonia, Habran, Margarita, Viol, Juliana Bento, Pandoli, Omar, Mancic, Lidija

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.25 MB

english, 2015

86

Fabrication and mechanical characterization of 3D woven Cu lattice materials

Zhang, Y., Ha, S., Sharp, K., Guest, J.K., Weihs, T.P., Hemker, K.J.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.01 MB

english, 2015

87

High temperature compression properties of open-cell Ni–20Cr foams produced by impregnation

Xiao, Lijun, Song, Weidong, Tang, Huiping, Zhu, Zhiwu, Wang, Jianzhong, Wang, Hui

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.07 MB

english, 2015

88

Analysis of the microstructure, texture and magnetic properties of strip casting 4.5wt.% Si non-oriented electrical steel

Zu, Guoqing, Zhang, Xiaoming, Zhao, Jingwei, Cui, Yi, Wang, Yuqian, Jiang, Zhengyi

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 1.41 MB

english, 2015

89

Dimensionality effects of carbon-based thermal additives for microporous adsorbents

Yang, Sungwoo, Kim, Hyunho, Narayanan, Shankar, McKay, Ian S., Wang, Evelyn N.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 987 KB

english, 2015

90

Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures

Chai, Linjiang, Luan, Baifeng, Xiao, Dongping, Zhang, Min, Murty, Korukonda L., Liu, Qing

Journal:

Materials & Design

Year:

2015

File:

PDF, 4.70 MB

2015

91

Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures

Chai, Linjiang, Luan, Baifeng, Xiao, Dongping, Zhang, Min, Murty, Korukonda L., Liu, Qing

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 4.70 MB

english, 2015

92

Combined effect of strain-rate and mode-ratio on the fracture of lead-free solder joints

Nourani, Amir, Spelt, Jan K.

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 2.70 MB

english, 2015

93

Editorial Board

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 73 KB

english, 2015

94

An investigation of the mechanical behaviour of fine tubes fabricated from a Ti–25Nb–3Mo–3Zr–2Sn alloy

Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David, Dargusch, Matthew

Journal:

Materials & Design

Year:

2015

Language:

english

File:

PDF, 3.46 MB

english, 2015