Chemical Engineering Science

1

Self-preservation of methane hydrate revealed immediately below the eutectic temperature of the mother electrolyte solution

Sato, Hiroshi, Sakamoto, Hiroya, Ogino, Shotaro, Mimachi, Hiroko, Kinoshita, Takahiro, Iwasaki, Toru, Sano, Kenichi, Ohgaki, Kazunari

Journal:

Year:

2013

Language:

english

File:

PDF, 553 KB

english, 2013

2

Comparison of the preparation of cerium oxide nanocrystallites by forward (base to acid) and reverse (acid to base) precipitation

Morris, V., Fleming, P.G., Holmes, J.D., Morris, M.A.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.03 MB

english, 2013

3

A high-pressure homogenization emulsification model—Improved emulsifier transport and hydrodynamic coupling

Håkansson, Andreas, Innings, Fredrik, Trägårdh, Christian, Bergenståhl, Björn

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 877 KB

english, 2013

4

Binary and ternary VLE of the 2-amino-2-methyl-1-propanol (AMP)/piperazine (Pz)/water system

Hartono, Ardi, Saeed, Muhammad, Ciftja, Arlinda F., Svendsen, Hallvard F.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.84 MB

english, 2013

5

Particle concentration using inclined sedimentation via sludge accumulation and removal for algae harvesting

Smith, Benjamin T., Davis, Robert H.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 430 KB

english, 2013

6

Viscoplastic–viscoplastic displacement in a plane channel with interfacial tension effects

Freitas, Jackson F., Soares, Edson J., Thompson, Roney L.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 2.15 MB

english, 2013

7

Particle-fluid mass transfer in multiparticle systems at low Reynolds numbers

Scala, Fabrizio

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 796 KB

english, 2013

8

Airslide flows. Part 2—Flow modeling and comparison with experiments

Oger, Luc, Savage, Stuart B.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.43 MB

english, 2013

9

An adaptive data-based modeling approach for predictive control of batch systems

Aumi, Siam, Mhaskar, Prashant

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 502 KB

english, 2013

10

Phase equilibria of clathrate hydrates of carbon disulfide + nitrogen or carbon dioxide + water system

Mohammadi, Amir H., Richon, Dominique

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 345 KB

english, 2013

11

Improvement of particle mixing and fluidization quality in rotating fluidized bed by inclined injection of fluidizing air

Nakamura, Hideya, Kondo, Tetsufumi, Watano, Satoru

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.91 MB

english, 2013

12

Removal of emulsion oil from oilfield ASP wastewater by internal circulation flotation and kinetic models

Qi, Wei-Kang, Yu, Zhong-Chen, Liu, Yu-Yu, Li, Yu-You

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 623 KB

english, 2013

13

Airslide flows, Part 1—Experiments, review and extension

Savage, Stuart B., Oger, Luc

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 865 KB

english, 2013

14

Dispersion of inorganic electrolytes in low-polarity solvents assisted by surface modified magnetic nanoparticles and their base catalytic properties

Iijima, Motoyuki, Otsubo, Takahiko, Kamiya, Hidehiro

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.13 MB

english, 2013

15

Modeling and dynamic analysis of a rotating disc contactor (RDC) extraction column using one primary and one secondary particle method (OPOSPM)

Attarakih, Menwer, Abu-Khader, Mazen, Bart, Hans-Jorg

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.43 MB

english, 2013

16

Morphological analysis for the development of reliable models for heterogeneously catalysed reactive distillation

von Harbou, Erik, Schmitt, Markus, Hasse, Hans

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.00 MB

english, 2013

17

Falling film melt crystallization (II): Model to simulate the dynamic sweating using fractal porous media theory

Jiang, Xiaobin, Hou, Baohong, He, Gaohong, Wang, Jingkang

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.14 MB

english, 2013

18

An improved Green's function method for isothermal effectiveness factor determination in one- and two-dimensional catalyst geometries

Mandaliya, Dharmendra D., Moharir, Arun S., Gudi, Ravindra D.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.42 MB

english, 2013

20

Retraction notice to “Room Temperature Ionic Liquids for Propyne-Propylene Separations: Solubility Behaviors and Selectivity Investigation” [Chem. Eng. Sci. 66 (2011) 6039–6047]

Palgunadi, Jelliarko, Indarto, Antonius

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 105 KB

english, 2013

21

Experimental analysis of the bubble–slug transition in a flow generated by a T-junction in a minichannel with air/water and air/ethanol mixtures in conditions relevant to microgravity

Arias, S., González-Cinca, R.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 380 KB

english, 2013

22

Fully resolved simulation of a gas-fluidized bed: A critical test of DEM models

Kriebitzsch, S.H.L., van der Hoef, M.A., Kuipers, J.A.M.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 712 KB

english, 2013

23

Evolution of dispersed drops during the mixing of mineral oil and water phases in a stirringtank

Wang, Wei, Liu, Jia, Wang, Pengyu, Duan, Jimiao, Gong, Jing

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 1.88 MB

english, 2013

24

Flexible blade for in-line measurement of low-range viscosity

Weihs, Daphne, Hadad, Tal, Gurka, Roi, Liberzon, Alex

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 688 KB

english, 2013

25

IFC

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 36 KB

english, 2013

26

A multiphysics numerical model of oxidation and decomposition in a uranium hydride bed

Kanouff, Michael P., Gharagozloo, Patricia E., Salloum, Maher, Shugard, Andrew D.

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 2.32 MB

english, 2013

27

Design of regeneration recycling water networks with internal water mains by using concentration potentialconcepts

Zhao, Hui-Peng, Fan, Xiao-Yan, Liu, Zhi-Yong

Journal:

Chemical Engineering Science

Year:

2013

Language:

english

File:

PDF, 835 KB

english, 2013

Volume 91

Self-preservation of methane hydrate revealed immediately below the eutectic temperature of the mother electrolyte solution

Comparison of the preparation of cerium oxide nanocrystallites by forward (base to acid) and reverse (acid to base) precipitation

A high-pressure homogenization emulsification model—Improved emulsifier transport and hydrodynamic coupling

Binary and ternary VLE of the 2-amino-2-methyl-1-propanol (AMP)/piperazine (Pz)/water system

Particle concentration using inclined sedimentation via sludge accumulation and removal for algae harvesting

Viscoplastic–viscoplastic displacement in a plane channel with interfacial tension effects

Particle-fluid mass transfer in multiparticle systems at low Reynolds numbers

Airslide flows. Part 2—Flow modeling and comparison with experiments

An adaptive data-based modeling approach for predictive control of batch systems

Phase equilibria of clathrate hydrates of carbon disulfide + nitrogen or carbon dioxide + water system

Improvement of particle mixing and fluidization quality in rotating fluidized bed by inclined injection of fluidizing air

Removal of emulsion oil from oilfield ASP wastewater by internal circulation flotation and kinetic models

Airslide flows, Part 1—Experiments, review and extension

Dispersion of inorganic electrolytes in low-polarity solvents assisted by surface modified magnetic nanoparticles and their base catalytic properties

Modeling and dynamic analysis of a rotating disc contactor (RDC) extraction column using one primary and one secondary particle method (OPOSPM)

Morphological analysis for the development of reliable models for heterogeneously catalysed reactive distillation

Falling film melt crystallization (II): Model to simulate the dynamic sweating using fractal porous media theory

Table of Contents

An improved Green's function method for isothermal effectiveness factor determination in one- and two-dimensional catalyst geometries

Retraction notice to “Room Temperature Ionic Liquids for Propyne-Propylene Separations: Solubility Behaviors and Selectivity Investigation” [Chem. Eng. Sci. 66 (2011) 6039–6047]

Experimental analysis of the bubble–slug transition in a flow generated by a T-junction in a minichannel with air/water and air/ethanol mixtures in conditions relevant to microgravity

Fully resolved simulation of a gas-fluidized bed: A critical test of DEM models

Evolution of dispersed drops during the mixing of mineral oil and water phases in a stirringtank

Flexible blade for in-line measurement of low-range viscosity

IFC

A multiphysics numerical model of oxidation and decomposition in a uranium hydride bed

Design of regeneration recycling water networks with internal water mains by using concentration potentialconcepts